不同功能型外加剂对掺废旧风机叶片3D打印混凝土性能的影响研究

Research on the influence of different functional additives on the properties of 3D printed concrete containing waste wind turbine blades

浏览量:

关键词:

风机叶片;流变性;可打印性;3D打印混凝土;减水剂;纤维素醚;引气剂

Key words:

Wind turbine blade; Rheological property; Printability; 3D printed concrete; Water reducer; Cellulose ether; Air-entraining agent

刊期:

2026年第6期

DOI:

10.19761/j.1000-4637.24120626

文章编号:

基金项目:

北京空间智筑技术有限公司建筑3D打印研发基金项目(2025-JJ-001)。

作者:

王欣欣,张永虹,杨博豪

单位:

北京空间智筑技术有限公司,北京 101111

摘要

为了促进废旧风机叶片的资源化利用,可将其用于3D打印混凝土中,但应用时存在可打印性不佳的问题。为解决此问题,本文研究了减水剂(掺量为0.14%、0.15%、0.16%)、增稠剂(掺量为0.03%、0.04%、0.05%)、引气剂(掺量为0.01%、0.02%、0.03%)对掺废旧风机叶片3D打印混凝土(以下简称3D打印混凝土)流变性能、可打印性的影响。结果表明:3D打印混凝土的最佳外加剂掺量为减水剂0.15%、增稠剂0.05%、引气剂0.03%,在此掺量下,3D打印混凝土的流变性能、可打印性均较好。研究成果可为废旧风机叶片在建筑3D打印领域的高值化利用提供理论依据。

In order to promote the resource utilization of waste wind turbine blades, they can be applied in 3D printed concrete. However, such material exhibits poor printability in practical applications. To address this issue, this paper investigated the effects of water reducers (dosages of 0.14%, 0.15%, and 0.16%), thickeners (dosages of 0.03%, 0.04%, and 0.05%), and air-entraining agents (dosages of 0.01%, 0.02%, and 0.03%) on the rheological properties and printability of 3D printed concrete containing waste wind turbine blades (3D printed concrete). The results show that the optimal admixture dosages are 0.15% water reducer, 0.05% thickener, and 0.03% air-entraining agent. Under the optimal mix proportion, the 3D printed concrete exhibits excellent rheological properties and printability. The research results can provide a theoretical basis for the high-value utilization of waste wind turbine blades in the field of architectural 3D printing.

结论

(1)本文3D打印混凝土的最佳外加剂掺量为减水剂0.15%、增稠剂0.05%、引气剂0.03%,在最佳掺量下,3D打印混凝土的流变性能、可打印性均较好。
(2)通过添加适量的减水剂、纤维素醚和引气剂,优化了3D打印混凝土的流变性能和可打印性,在一定程度上可以促进废旧风机叶片的高值化利用,解决其应用在3D打印混凝土中时存在的浆体性能问题。然而,本研究仍存在一些不足之处,如对于外加剂的作用机理探讨尚不够深入,今后的研究可深入进行机理分析,还可扩大废旧风机叶片的掺量范围,以探索更广泛的应用可能性。

参考文献

[1] 王瑜玲,王春福,张飞燕,等.3D打印混凝土性能要求及相关外加剂研究进展[J].硅酸盐通报,2021,40(6):1844-1854.
[2] NEREIIA V N,BEIGH M A B,FATAEI S,et al.Strain-based approach for measuring structural build-up of cement pastes in the context of digital construction[J].Cement and Concrete Research,2019,115:530-544.
[3] KETEL S,FALZONE G,WANG B,et al.A printability index for linking slurry rheology to the geometrical attributes of 3D-printed components[J].Cement and Concrete Composites,2019,101:32-43.
[4] 张云升,陈逸东,刘诚,等.含粗骨料3D打印混凝土可打印、力学、收缩性能与碳排放分析[J].混凝土与水泥制品,2024(5): 1-8.
[5] 张耀宇,王文明,蔡炎皓,等.外加剂对沙漠砂混凝土3D打印性能的影响[J].混凝土与水泥制品,2022(9):1-6.
[6] 王里,王建,李志强,等.3D打印混凝土层间粘结性能及影响因素研究[J].硅酸盐学报,2023,51(6):1453-1462.
[7] FENG Y,LIN H Y,HO S L,et al.Overview of wind power generation in China: status and development[J].Renewable and Sustainable Energy Reviews,2015,50:847-858.
[8] 马文静,张宇彤,杨春振,等.大宗风电退役风机叶片资源化回收利用技术研究进展[J].洁净煤技术,2023,29(10):17-26.
[9] JENSEN J P,SKELTON K.Wind turbine blade recycling: challenges and possibilities in a circular economy[J].Renewable and Sustainable Energy Reviews,2018,107:165-176.
[10] CORREIA J R,ALMEIDA N M,FIGUEIRA J R.Recycling of FRP composites: reusing fine GFRP waste in concrete mixtures[J].Journal of Cleaner Production,2011,19(15):1745-1753.
[11] 于雪梅,朱晓华,刘卫生,等.废弃风电叶片切割装置设计及破碎料的应用[J].工程塑料应用,2018,46(6):60-64.
[12] 江洪,康学萍.3D打印技术的发展分析[J].新材料产业,2013(10):30-35.
[13] 张超,邓智聪,马蕾,等.3D打印混凝土研究进展及其应用[J]. 硅酸盐通报,2021,40(6):1769-1795.
[14] 盛蕾,武雷.3D打印混凝土技术研究综述[J].混凝土与水泥制品,2021(10):7-11.
[15] 刘志飞,付兴玉,刘度,等.煤矸石充填浆体中聚羧酸减水剂的竞争吸附机制研究[J].工程科学学报,2025,47(12):2388-2396.

[1] 王瑜玲,王春福,张飞燕,等.3D打印混凝土性能要求及相关外加剂研究进展[J].硅酸盐通报,2021,40(6):1844-1854.
[2] NEREIIA V N,BEIGH M A B,FATAEI S,et al.Strain-based approach for measuring structural build-up of cement pastes in the context of digital construction[J].Cement and Concrete Research,2019,115:530-544.
[3] KETEL S,FALZONE G,WANG B,et al.A printability index for linking slurry rheology to the geometrical attributes of 3D-printed components[J].Cement and Concrete Composites,2019,101:32-43.
[4] 张云升,陈逸东,刘诚,等.含粗骨料3D打印混凝土可打印、力学、收缩性能与碳排放分析[J].混凝土与水泥制品,2024(5): 1-8.
[5] 张耀宇,王文明,蔡炎皓,等.外加剂对沙漠砂混凝土3D打印性能的影响[J].混凝土与水泥制品,2022(9):1-6.
[6] 王里,王建,李志强,等.3D打印混凝土层间粘结性能及影响因素研究[J].硅酸盐学报,2023,51(6):1453-1462.
[7] FENG Y,LIN H Y,HO S L,et al.Overview of wind power generation in China: status and development[J].Renewable and Sustainable Energy Reviews,2015,50:847-858.
[8] 马文静,张宇彤,杨春振,等.大宗风电退役风机叶片资源化回收利用技术研究进展[J].洁净煤技术,2023,29(10):17-26.
[9] JENSEN J P,SKELTON K.Wind turbine blade recycling: challenges and possibilities in a circular economy[J].Renewable and Sustainable Energy Reviews,2018,107:165-176.
[10] CORREIA J R,ALMEIDA N M,FIGUEIRA J R.Recycling of FRP composites: reusing fine GFRP waste in concrete mixtures[J].Journal of Cleaner Production,2011,19(15):1745-1753.
[11] 于雪梅,朱晓华,刘卫生,等.废弃风电叶片切割装置设计及破碎料的应用[J].工程塑料应用,2018,46(6):60-64.
[12] 江洪,康学萍.3D打印技术的发展分析[J].新材料产业,2013(10):30-35.
[13] 张超,邓智聪,马蕾,等.3D打印混凝土研究进展及其应用[J]. 硅酸盐通报,2021,40(6):1769-1795.
[14] 盛蕾,武雷.3D打印混凝土技术研究综述[J].混凝土与水泥制品,2021(10):7-11.
[15] 刘志飞,付兴玉,刘度,等.煤矸石充填浆体中聚羧酸减水剂的竞争吸附机制研究[J].工程科学学报,2025,47(12):2388-2396.

引用本文

王欣欣,张永虹,杨博豪.不同功能型外加剂对掺废旧风机叶片3D打印混凝土性能的影响研究[J].混凝土与水泥制品,2026,53(4):91-96. WANG X X,ZHANG Y H,YANG B H.Research on the influence of different functional additives on the properties of 3D printed concrete containing waste wind turbine blades[J].China Concrete and Cement Products,2026,53(4):91-96 (in Chinese).


上一个: 富水低温隧道工况下低回弹喷射混凝土的应用研究

下一个: 不同岩性、比粒度机制砂对C30混凝土性能的影响研究

相关文件