全部文章

全生命周期减碳技术与碳排放评价

林茂松1,2,杨利香1,2,杨 光1,2

摘   要:研究了CO2矿化养护(预养护条件、CO2浓度、养护压力和养护时间)对混凝土固碳率和性能的影响,并对养护后混凝土的微观形貌和矿物组成进行了分析。结果表明:通过合理的预养护可以降低试件的剩余水灰比,有效提高试件的表观固碳率;相对于标准和加热干燥预养护,室温吹风为最宜预养护条件;当CO2浓度为99.9%、养护压力为0.8 MPa、养护时间为12 h时,试件的固碳能力较好,28 d抗压强度达60.0 MPa,抗氯离子渗透、抗渗和抗冻性能均较好,28 d碳化深度稍有增加,但28 d至56 d碳化深度不再增加;CO2矿化养护会消耗混凝土中的Ca(OH)2,生成更多的CaCO3产物,改善了混凝土的微观结构。Abstract: The influence of CO2 mineralization curing (pre-curing conditions, CO2 concentration, curing pressure, and curing time) on the carbon fixation rate and performance of concrete was studied, and the microstructure and mineral composition of the cured concrete were analyzed. The results indicate that reasonable pre-curing can reduce the residual water-cement ratio of the specimens, effectively improve the apparent carbon fixation rate of the specimens. Compared to standard and heating drying pre-curing, room temperature air blowing is the most suitable pre-curing condition. When the CO2 concentration is 99.9%, the curing pressure is 0.8 MPa, and the CO2 mineralization curing time is 12 h, the carbon fixation ability of the specimen is good, the compressive strength at 28 d reaches 60.0 MPa, and the resistance to chloride ion penetration, permeability, and frost resistance is good. The carbonization depth slightly increases at 28 d, but the carbonization depth does not increase from 28 d to 56 d. CO2 mineralization curing consumes Ca(OH)2 in concrete, generates more CaCO3 products, and improves the microstructure of concrete.
林茂松,杨利香,杨光.CO2矿化养护对混凝土性能影响的试验研究[J].混凝土与水泥制品,2025(8):111-114. LIN M S,YANG L X,YANG G.Experimental study on the influence of CO2 mineralization curing on concrete performance[J].China Concrete and Cement Products,2025(8):[J].China Concrete and Cement Products,2025(8):111-114.
摘   要:实现混凝土全生命周期碳减排,对建筑行业的低碳与绿色可持续发展具有重要意义。混凝土全生命周期减碳技术主要有3类:直接减碳技术、间接减碳技术和碳的捕集、利用与封存(CCUS)技术;直接减碳技术包括水泥清洁生产技术(提高能源利用率、使用非碳钙质原料、清洁燃料和清洁电力)和混凝土成分优化技术(使用低碳胶凝材料、矿物掺合料和再生骨料);间接减碳技术主要通过提高混凝土耐久性能实现;CCUS技术贯穿混凝土全生命周期中的各个阶段,通过在混凝土拌合与养护、再生骨料碳化养护过程中注入CO2,可有效实现碳封存。Abstract: Realizing carbon reduction throughout the life-cycle of concrete is of great significance for the low-carbon and green sustainable development of the construction industry. There are three main types of carbon reduction technologies for the life-cycle of concrete, including direct carbon reduction technology, indirect carbon reduction technology, and carbon capture, utilization and storage(CCUS) technology. Direct carbon reduction technologies include cement clean production technologies(improving energy efficiency, using non carbon calcium raw materials, clean fuels, and clean electricity) and concrete composition optimization technologies(using low-carbon cementitious materials, mineral admixtures, and recycled aggregates). Indirect carbon reduction technology is mainly achieved by improving the durability of concrete. CCUS technology runs through various stages of the life-cycle of concrete. By injecting CO2 during concrete mixing and curing, as well as carbonation curing of recycled aggregates, carbon sequestration can be effectively achieved.
张菊辉,江慧.混凝土全生命周期减碳技术研究综述[J].混凝土与水泥制品,2025(8):106-110,116. ZHANG J H,JIANG H.A review of life-cycle carbon reduction technologies for concrete[J].China Concrete and Cement Products,2025(8):106-110,116.
摘   要:采用碳排放因子法,考虑混凝土原材料开采与加工、原材料运输和产品生产3个环节,开展了上海地区C20~C60预拌混凝土单位产品的碳排放量计算,并对其减碳潜力进行了量化分析。结果表明:原材料开采与加工环节的碳排放量最大,减碳潜力也最大,减碳贡献率大于90%;采用低碳矿物掺合料适量替代高碳排放的水泥、再生骨料适量替代天然骨料,可有效增强原材料开采与加工环节的减碳效果。Abstract: Using the carbon emission factor method, considering the three links of concrete raw material mining and processing, raw material transportation, and product production, the unit product carbon emissions of C20~C60 ready-mixed concrete in Shanghai were calculated, and its carbon reduction potential was quantitatively analyzed. The results indicate that the carbon emissions from raw material mining and processing are the highest, and the carbon reduction potential is also the greatest, with a carbon reduction contribution rate greater than 90%. Replacing high carbon emission cement with low-carbon mineral admixtures of appropriate content, and replacing natural aggregates with an appropriate content of recycled aggregates, can effectively enhance the carbon reduction effect of raw material mining and processing.
钱耀丽,韩云婷,杨光.上海地区预拌混凝土行业碳排放计算与减碳潜力分析[J].混凝土与水泥制品,2025(8):100-105. QIAN Y L,HAN Y T,YANG G.Carbon emission calculation and carbon reduction potential analysis of ready-mixed concrete industry in Shanghai[J].China Concrete and Cement Products,2025(8):100-105.