韩彦军1,张 宇1,白晓军2
CRTSⅡ型无砟轨道板专用数控磨床定位分析
Fixed Position Analysis on Special Computer Numerical Control Grinding Machine of CRTS Ⅱ Rail Board
2015年第4期
CRTSⅡ型无砟轨道板;定位;弯矩;正应力;数控磨床
CRTSⅡrail board; Fixed position; Minimum bending moment; Normal stress; Computer numerical control grinding machine
2015年第4期
1000-4637(2015)04-36-03
石家庄市科技局资助项目(13108011A)
韩彦军1,张 宇1,白晓军2
1.石家庄铁道大学,050043;2.河北新大地机电制造有限公司,石家庄 050043
浏览量:
1000
CRTSⅡ型无砟轨道板专用数控磨床定位分析
英文名 :
Fixed Position Analysis on Special Computer Numerical Control Grinding Machine of CRTS Ⅱ Rail Board
刊期 :
2015年第4期
关键词 :
CRTSⅡ型无砟轨道板;定位;弯矩;正应力;数控磨床
Key words :
CRTSⅡrail board; Fixed position; Minimum bending moment; Normal stress; Computer numerical control grinding machine
刊期 :
2015年第4期
DOI :
文章编号 :
1000-4637(2015)04-36-03
基金项目 :
石家庄市科技局资助项目(13108011A)
作者 :
韩彦军1,张 宇1,白晓军2
单位 :
1.石家庄铁道大学,050043;2.河北新大地机电制造有限公司,石家庄 050043
韩彦军1,张 宇1,白晓军2
摘要
参数
结论
参考文献
引用本文
摘 要:通过对CRTSⅡ型无砟轨道板专用数控磨床定位点及支撑力的理论分析,确定了CRTSⅡ型无砟轨道板在专用数控磨床磨削中定位点的合理位置,以及各支撑液压缸支撑力的大小分配比,使CRTSⅡ型无砟轨道板能够在所受弯矩均匀、正应力最小的状态下进行磨削,从而减小了自身内部应力的影响,提高了CRTSⅡ型无砟轨道板的磨削质量。
Abstract:By theoretical analysis, the reasonable locations of the anchor points and the magnitude of force in the hydraulic cylinders are determined in the special CNC grinding machine for grinding the CRTSⅡrail board.It enables the board to be grinded in a state under the condition of uniform bending moment and the smallest normal stress, so that it reduces the influence of its own internal stress and improves the grinding quality.
关键词:
CRTSⅡ型无砟轨道板;定位;弯矩;正应力;数控磨床
扫二维码用手机看
版权所有:中国混凝土与水泥制品网 苏ICP备10086386号 网站建设:中企动力 苏州