宋泽钊1,张燕坤1,韩延霄2
基于m、k法的轻骨料混凝土组合楼板纵向剪切粘结性能模拟分析
Simulation Analysis on Longitudinal Shearing Bond Performance of Composite Slab with Lightweight Aggregate Concrete Based on m a
2014年第1期
轻骨料混凝土;压型钢板;组合楼板;纵向剪切粘结性能
Lightweight aggregate concrete; Profiled steel sheet; Composite slab; Longitudinal shear bond performance
2014年第1期
1000-4637(2014)01-63-04
宋泽钊1,张燕坤1,韩延霄2
1. 北方工业大学建筑工程学院,北京 100144;2.中铁第五勘察设计院集团有限公司,北京 102600
浏览量:
1000
基于m、k法的轻骨料混凝土组合楼板纵向剪切粘结性能模拟分析
英文名 :
Simulation Analysis on Longitudinal Shearing Bond Performance of Composite Slab with Lightweight Aggregate Concrete Based on m a
刊期 :
2014年第1期
关键词 :
轻骨料混凝土;压型钢板;组合楼板;纵向剪切粘结性能
Key words :
Lightweight aggregate concrete; Profiled steel sheet; Composite slab; Longitudinal shear bond performance
刊期 :
2014年第1期
DOI :
文章编号 :
1000-4637(2014)01-63-04
基金项目 :
作者 :
宋泽钊1,张燕坤1,韩延霄2
单位 :
1. 北方工业大学建筑工程学院,北京 100144;2.中铁第五勘察设计院集团有限公司,北京 102600
宋泽钊1,张燕坤1,韩延霄2
摘要
参数
结论
参考文献
引用本文
摘 要:利用ANSYS对压型钢板—轻骨料混凝土组合楼板进行了建模分析,得到了极限荷载、跨中最大挠度和板端相对滑移值,并采用欧洲规范4的建议公式,回归得出组合楼板的剪力粘结系数m、k,可为该种楼板的工程设计提供参考依据。
Abstract: The ANSYS software is used in the analogue simulation of the composite slab (profiled steel sheet-lightweight aggregate concrete), and the ultimate load, maximum deflection and longitudinal slide values of each slab are obtained after calculating the program. Based on the test results, the shearing bond coefficients (m, k) of the composite slab are defined with regression analysis by using the suggested formula of Eurocode 4, which can be used in practical design.
关键词:
轻骨料混凝土;压型钢板;组合楼板;纵向剪切粘结性能
扫二维码用手机看
版权所有:中国混凝土与水泥制品网 苏ICP备10086386号 网站建设:中企动力 苏州