毛卫林1,刘远祥2
预制混凝土检查井轴向承载力测试方法及结果分析
Test Method and Results Analysis on Axial Bearing of Precast Concrete Inspection Well
2014年第3期
预制混凝土检查井;轴向承载力;检验指标;测试方法;试验验证
Precast concrete inspection well;Axial bearing; Inspection index Test method; Experimental verification
2014年第3期
1000-4637(2014)03-37-02
毛卫林1,刘远祥2
1.昆山市产品质量监督检验所,215300;2.苏州混凝土水泥制品研究院有限公司, 江苏省高耐久混凝土工程技术研究中心,215004
浏览量:
1000
预制混凝土检查井轴向承载力测试方法及结果分析
英文名 :
Test Method and Results Analysis on Axial Bearing of Precast Concrete Inspection Well
刊期 :
2014年第3期
关键词 :
预制混凝土检查井;轴向承载力;检验指标;测试方法;试验验证
Key words :
Precast concrete inspection well;Axial bearing; Inspection index Test method; Experimental verification
刊期 :
2014年第3期
DOI :
文章编号 :
1000-4637(2014)03-37-02
基金项目 :
作者 :
毛卫林1,刘远祥2
单位 :
1.昆山市产品质量监督检验所,215300;2.苏州混凝土水泥制品研究院有限公司, 江苏省高耐久混凝土工程技术研究中心,215004
毛卫林1,刘远祥2
摘要
参数
结论
参考文献
引用本文
摘 要:为了验证《预制混凝土检查井》标准规定的预制混凝土检查井产品轴向承载力检验指标和相应的轴向承载力测试方法,试制了规格为DN1200的预制混凝土检查井产品并开展了轴向承载力测试。测试结果表明,标准规定的轴向承载力指标是合适的,相应的测试方法是可行的。
Abstract:In order to verify the axial bearing index and its corresponding test method of the precast concrete products from“precast concrete inspection Wells” standards, DN1200 precast concrete well is produced and its axial bearing is tested. The results show that the standard specification for the axial bearing index of precast concrete products is appropriate, and the corresponding test method is feasible.
关键词:
预制混凝土检查井;轴向承载力;检验指标;测试方法;试验验证
扫二维码用手机看
上一个
C50预制箱梁裂缝的原因分析
版权所有:中国混凝土与水泥制品网 苏ICP备10086386号 网站建设:中企动力 苏州