苏州混凝土水泥制品研究院有限公司

头部文案

发布时间:2020-01-06 00:00:00
全国建材科技期刊
全国中文核心期刊
中国科技论文统计源期刊
万方数据-数字化期刊群入网期刊
中国学术期刊(光盘版)全文收录期刊
华东地区优秀科技期刊
江苏省期刊方阵“双效期刊”
中国期刊网全文收录期刊
中国科技期刊数据库全文收录期刊
抗裂圆环的干缩应力分析——Ⅵ. 不均匀干燥时钢芯壁厚的影响及抗裂性能判据
Shrinkage Stress Analysis on Breaking Ring——Ⅵ. Influence of Thickness of Steel Core and Judgements of Anti-cracking Performance
2014年第6期
抗裂圆环;不均匀干缩变形;钢芯厚度
Breaking ring; Deformation of inhomogeneous shrinkage; Thickness of steel core
2014年第6期
1000-4637(2014)06-05-05
张承志1,王爱勤2,陈文耀3
1. 河南大学材料与结构研究所,开封 475004;2. 中原工学院建筑工程学院,郑州 450007; 3. 中国水利水电第三工程局有限公司,西安 710016

张承志1,王爱勤2,陈文耀3

浏览量:
1000
摘 要:在弹性力学基本方程的基础上,研究了不均匀干燥时钢芯壁厚对径向位移分布、径向应变分布、环向应变分布、径向应力分布和环向应力分布的影响规律,并将其结果与均匀干燥情况进行了比较。通过比较发现,当钢芯壁厚较薄时,不均匀干燥时的最大环向拉应力大于均匀干燥时的最大环向拉应力;当钢芯壁厚较厚时,不均匀干燥时的最大环向拉应力小于均匀干燥时的最大环向拉应力。临界钢芯厚度随水泥基材料弹性模量的增大而增大。 Abstract: On the basis of the equations of elasticity, the influences of the thickness of steel core on the distribution of the radial displacement, radial strain, circumferential strain, radial stress and circumferential stress are studied under the condition of inhomogeneous drying, and the results are compared to that under the condition of homogeneously drying. It is discovered by the comparison that the maximum of circumferential tensile stress under the condition of inhomogeneous drying is larger than that under the condition of homogeneous drying if the thick of steel core is small, but the maximum of circumferential tensile stress under the condition of inhomogeneous drying is less than that under the condition of homogeneous drying if the thick of steel core is large. The critical thickness of steel core increases with the increase of the elastic modulus of cement-based material.
英文名 : Shrinkage Stress Analysis on Breaking Ring——Ⅵ. Influence of Thickness of Steel Core and Judgements of Anti-cracking Performance
刊期 : 2014年第6期
关键词 : 抗裂圆环;不均匀干缩变形;钢芯厚度
Key words : Breaking ring; Deformation of inhomogeneous shrinkage; Thickness of steel core
刊期 : 2014年第6期
DOI :
文章编号 : 1000-4637(2014)06-05-05
基金项目 :
作者 : 张承志1,王爱勤2,陈文耀3
单位 : 1. 河南大学材料与结构研究所,开封 475004;2. 中原工学院建筑工程学院,郑州 450007; 3. 中国水利水电第三工程局有限公司,西安 710016

张承志1,王爱勤2,陈文耀3

摘要
参数
结论
参考文献
引用本文

摘   要:在弹性力学基本方程的基础上,研究了不均匀干燥时钢芯壁厚对径向位移分布、径向应变分布、环向应变分布、径向应力分布和环向应力分布的影响规律,并将其结果与均匀干燥情况进行了比较。通过比较发现,当钢芯壁厚较薄时,不均匀干燥时的最大环向拉应力大于均匀干燥时的最大环向拉应力;当钢芯壁厚较厚时,不均匀干燥时的最大环向拉应力小于均匀干燥时的最大环向拉应力。临界钢芯厚度随水泥基材料弹性模量的增大而增大。

Abstract: On the basis of the equations of elasticity, the influences of the thickness of steel core on the distribution of the radial displacement, radial strain, circumferential strain, radial stress and circumferential stress are studied under the condition of inhomogeneous drying, and the results are compared to that under the condition of homogeneously drying. It is discovered by the comparison that the maximum of circumferential tensile stress under the condition of inhomogeneous drying is larger than that under the condition of homogeneous drying if the thick of steel core is small, but the maximum of circumferential tensile stress under the condition of inhomogeneous drying is less than that under the condition of homogeneous drying if the thick of steel core is large. The critical thickness of steel core increases with the increase of the elastic modulus of cement-based material.

关键词:
抗裂圆环;不均匀干缩变形;钢芯厚度
扫二维码用手机看
未找到相应参数组,请于后台属性模板中添加
(1)径向位移和环向应变都随钢芯壁厚的增加而减小。随着钢芯壁厚的增加,钢芯内侧的环向压应力减小,但水泥基材料圆环外侧的环向拉应力却增大。水泥基材料的弹性模量越大,钢芯厚度对其外侧环向拉应力的影响越显著。
(2)当钢芯壁厚较薄时,不均匀干燥环境下水泥基材料圆环中的最大环向拉应力大于均匀干燥环境下水泥基材料圆环中的最大环向拉应力;当钢芯壁厚较厚时,不均匀干燥环境下水泥基材料圆环中的最大环向拉应力小于均匀干燥环境下水泥基材料圆环中的最大环向拉应力。其临界壁厚随着水泥基材料弹性模量的增加而增大。
(3)在不均匀干燥环境下,钢芯壁厚对水泥基材料圆环中最大环向拉应力的影响小于均匀干燥环境。
(4)对于圆环抗裂试验条件与绝对约束条件的偏差,不均匀干燥过程小于均匀干燥过程。
[1] 王爱勤, 张承志, 陈文耀. 抗裂圆环干缩应力分析: Ⅰ. 均匀干燥时的理论分析[J]. 混凝土与水泥制品, 2014(1): 5-8.
[2] 吴家龙. 弹性力学[M]. 北京: 高等教育出版社, 1999.

相关文件

暂时没有内容信息显示
请先在网站后台添加数据记录。

关注《混凝土与水泥制品》

总访问量 468,401   网站统计

官方微信公众号关闭
苏州混凝土水泥制品研究院有限公司

关于我们    |    联系我们    |    订购杂志    |    回到顶部

版权所有:中国混凝土与水泥制品网  苏ICP备10086386号   网站建设:中企动力 苏州

版权所有:中国混凝土与水泥制品网

苏ICP备10086386号

网站建设:中企动力 苏州