韩彦军,赵承芳
基于ANSYS的PC构件自动化养护堆垛机的设计
Design on Automated Curing Stacking Machine of Prefabricated Concrete (PC) Component by ANSYS Software
2013年第3期
PC构件;自动化生产线;养护设备;堆垛机;ANSYS软件
Prefabricated concrete component; Automated production line; Curing equipment; Stacking machine; ANSYS software
2013年第3期
1000-4637(2013)03-70-03
石家庄市科技局资助项目(10108461A)。
韩彦军,赵承芳
石家庄铁道大学, 050043
浏览量:
1000
基于ANSYS的PC构件自动化养护堆垛机的设计
英文名 :
Design on Automated Curing Stacking Machine of Prefabricated Concrete (PC) Component by ANSYS Software
刊期 :
2013年第3期
关键词 :
PC构件;自动化生产线;养护设备;堆垛机;ANSYS软件
Key words :
Prefabricated concrete component; Automated production line; Curing equipment; Stacking machine; ANSYS software
刊期 :
2013年第3期
DOI :
文章编号 :
1000-4637(2013)03-70-03
基金项目 :
石家庄市科技局资助项目(10108461A)。
作者 :
韩彦军,赵承芳
单位 :
石家庄铁道大学, 050043
韩彦军,赵承芳
摘要
参数
结论
参考文献
引用本文
摘 要:结合实际生产需要,研究了预制混凝土构件自动化生产线中的自动化养护堆垛机,并通过ANSYS软件分析了立体养护设备的承载结构。分析结果表明,采用ANSYS软件进行有限元分析计算,较好地优化了堆垛机的结构,使其满足了设计要求。
Abstract: Combined with the actual production needs, a stacking machine of curing equipment of prefabricated concrete (PC) component automated production line is designed, and stereo curing equipment bearing structure is analyzed through ANSYS software. The analyzed results show that the structure of stacking machine of the curing equipment can be better improved, and can satisfy the design requirements by the ANSYS software for analyzing PC component finite element.
关键词:
PC构件;自动化生产线;养护设备;堆垛机;ANSYS软件
扫二维码用手机看
版权所有:中国混凝土与水泥制品网 苏ICP备10086386号 网站建设:中企动力 苏州