苏州混凝土水泥制品研究院有限公司

头部文案

发布时间:2020-01-06 00:00:00
全国建材科技期刊
全国中文核心期刊
中国科技论文统计源期刊
万方数据-数字化期刊群入网期刊
中国学术期刊(光盘版)全文收录期刊
华东地区优秀科技期刊
江苏省期刊方阵“双效期刊”
中国期刊网全文收录期刊
中国科技期刊数据库全文收录期刊
蒸压无石棉纤维水泥板鼓泡分层现象原因及解决措施
Causes and Solutions of the Bubbling and Delamination in Autoclaved Asbestos-Free Fiber Cement Board
2019年第12期
蒸压无石棉纤维水泥板;鼓泡分层;原因;解决措施
Autoclaved asbestos-free fiber cement board; Bubbling and layering; Cause; Solution
2019年第12期
10.19761/j.1000-4637.2019.12.038.05
徐定丰
金强(福建)建材科技股份有限公司,福州350215

徐定丰

徐定丰.蒸压无石棉纤维水泥板鼓泡分层现象原因及解决措施[J].混凝土与水泥制品,2019(12):38-42.

XU D F.Causes and Solutions of the Bubbling and Delamination in Autoclaved Asbestos-Free Fiber Cement Board[J].China Concrete and Cement Products,2019(12):38-42.

浏览量:
1000
摘 要:结合实际生产,分析了蒸压无石棉纤维水泥板生产过程中鼓泡分层现象的原因,并结合实际生产,从提高坯料黏结力(优化原材料加工处理、回水回料控制、外加剂的应用、板材的压制工艺、优化预养、蒸养制度等)和优化养护制度出发,提出了相应的解决措施,以期为蒸压无石棉纤维水泥板的生产提供参考借鉴。 Abstract: Based on the actual production, the causes of the bubble and layering phenomenon in the production process of autoclaved asbestos-free fiber cement board were analyzed, and in combination with the actual production, in order to improve the bonding strength of the blank (optimize the processing and treatment of raw materials, return water and return material) Control, application of additives, pressing process, optimization of pre curing, steam curing system, etc.) and optimization of curing system, the corresponding solutions are put forward in order to provide a reference for the production of steam pressed asbestos-free fiber cement board.
英文名 : Causes and Solutions of the Bubbling and Delamination in Autoclaved Asbestos-Free Fiber Cement Board
刊期 : 2019年第12期
关键词 : 蒸压无石棉纤维水泥板;鼓泡分层;原因;解决措施
Key words : Autoclaved asbestos-free fiber cement board; Bubbling and layering; Cause; Solution
刊期 : 2019年第12期
DOI : 10.19761/j.1000-4637.2019.12.038.05
文章编号 :
基金项目 :
作者 : 徐定丰
单位 : 金强(福建)建材科技股份有限公司,福州350215

徐定丰

徐定丰.蒸压无石棉纤维水泥板鼓泡分层现象原因及解决措施[J].混凝土与水泥制品,2019(12):38-42.

XU D F.Causes and Solutions of the Bubbling and Delamination in Autoclaved Asbestos-Free Fiber Cement Board[J].China Concrete and Cement Products,2019(12):38-42.

摘要
参数
结论
参考文献
引用本文

摘   要:结合实际生产,分析了蒸压无石棉纤维水泥板生产过程中鼓泡分层现象的原因,并结合实际生产,从提高坯料黏结力(优化原材料加工处理、回水回料控制、外加剂的应用、板材的压制工艺、优化预养、蒸养制度等)和优化养护制度出发,提出了相应的解决措施,以期为蒸压无石棉纤维水泥板的生产提供参考借鉴。业的不断发展略尽绵力。
Abstract: Based on the actual production, the causes of the bubble and layering phenomenon in the production process of autoclaved asbestos-free fiber cement board were analyzed, and in combination with the actual production, in order to improve the bonding strength of the blank (optimize the processing and treatment of raw materials, return water and return material) Control, application of additives, pressing process, optimization of pre curing, steam curing system, etc.) and optimization of curing system, the corresponding solutions are put forward in order to provide a reference for the production of steam pressed asbestos-free fiber cement board.

关键词:
蒸压无石棉纤维水泥板;鼓泡分层;原因;解决措施
扫二维码用手机看
未找到相应参数组,请于后台属性模板中添加

为避免或减少蒸压无石棉纤维水泥板出现鼓泡分层,关键在于稳定原材料性能、严格控制相关工艺参数、加强生产过程的监控、保持稳定生产;必要时使用硅微粉、絮凝剂、膨润土、偏高岭土等外加剂改善料浆分散性,从而增强纤维的吸附能力,减少板材分层的现象出现,最终提高纤维水泥制品性能

[1] 徐定丰.免蒸压无石棉纤维增强水泥板生产工艺探讨[J].混凝土与水泥制品,2019(10):37-39.
[2] 胡文蛟.蒸压的纤维硅酸钙制品的硬化 纤维增强水泥及其制品论文选集(1)[C].北京:中国建筑工业出版社,2010.

徐定丰.蒸压无石棉纤维水泥板鼓泡分层现象原因及解决措施[J].混凝土与水泥制品,2019(12):38-42.

XU D F.Causes and Solutions of the Bubbling and Delamination in Autoclaved Asbestos-Free Fiber Cement Board[J].China Concrete and Cement Products,2019(12):38-42.

 

相关文件

暂时没有内容信息显示
请先在网站后台添加数据记录。

关注《混凝土与水泥制品》

总访问量 468,401   网站统计

官方微信公众号关闭
苏州混凝土水泥制品研究院有限公司

关于我们    |    联系我们    |    订购杂志    |    回到顶部

版权所有:中国混凝土与水泥制品网  苏ICP备10086386号   网站建设:中企动力 苏州

版权所有:中国混凝土与水泥制品网

苏ICP备10086386号

网站建设:中企动力 苏州