邱玉深
关于混凝土施工缝位置的商讨
Discussion on the Construction Joints Position of Concrete
2011年第7期
施工缝;施工缝界面;剪力较小;受力较小
Construction joint; Interface of construction joint; Smaller Shearing; Smaller Loading
2011年第7期
1000-4637(2011)07-61-04
邱玉深
辽宁省铁岭市第一建筑工程公司,112000
浏览量:
1000
关于混凝土施工缝位置的商讨
英文名 :
Discussion on the Construction Joints Position of Concrete
刊期 :
2011年第7期
关键词 :
施工缝;施工缝界面;剪力较小;受力较小
Key words :
Construction joint; Interface of construction joint; Smaller Shearing; Smaller Loading
刊期 :
2011年第7期
DOI :
文章编号 :
1000-4637(2011)07-61-04
基金项目 :
作者 :
邱玉深
单位 :
辽宁省铁岭市第一建筑工程公司,112000
邱玉深
摘要
参数
结论
参考文献
引用本文
摘 要:混凝土浇筑宜连续不间断进行,以避免出现削弱结构受力性能及变形特征的施工缝。传统的施工缝位置一般留于“剪力较小且便于施工”之部位,此法存在一些缺陷和不足。针对这种情况,提出了“受力较小且便于施工”的施工缝位置留置原则。
Abstract: Pouring concrete should be carried out without intermittence, so as to prevent the construction joints which may weaken the structure bearing performances and have deformation characteristic. The traditional construction joints are usually marked on the position with “smaller shearing and convenient for construction”, however, this method has a few defects and shortcoming. Aiming at this situation, the setting principle of the construction joints position with “smaller loading and convenient for construction” is proposed
关键词:
施工缝;施工缝界面;剪力较小;受力较小
扫二维码用手机看
上一个
无
下一个
燕尾型接头地下连续墙施工技术
版权所有:中国混凝土与水泥制品网 苏ICP备10086386号 网站建设:中企动力 苏州