苏州混凝土水泥制品研究院有限公司

头部文案

发布时间:2020-01-06 00:00:00
全国建材科技期刊
全国中文核心期刊
中国科技论文统计源期刊
万方数据-数字化期刊群入网期刊
中国学术期刊(光盘版)全文收录期刊
华东地区优秀科技期刊
江苏省期刊方阵“双效期刊”
中国期刊网全文收录期刊
中国科技期刊数据库全文收录期刊
内圆外方复合钢管高强混凝土短柱受压承载力计算
Calculation of Compression Bearing Capacity of Composite-sectioned High Strength Concrete Filled Steel Tubular Short Columns
2019年第2期
统一强度理论;复合钢管高强混凝土短柱;受压承载力计算
Unified strength theory; Composite-sectioned high strength concrete filled steel tubular short column; Calculation of compressio
2019年第2期
10.19761/j.1000-4637.2019.02.044.04
国家自然基金资助项目(51308479);四川省科技厅应用基础项目(2018JY0443);四川省教育厅资助项目(18CZ0012);绵阳市科技攻关项目(15S-02-3)。
张兆强
西南科技大学土木工程与建筑学院,绵阳 621010

张兆强

张兆强.内圆外方复合钢管高强混凝土短柱受压承载力计算[J].混凝土与水泥制品,2019(2):44-47.

ZHANG Z Q.Calculation of Compression Bearing Capacity of Composite-sectioned High Strength Concrete Filled Steel Tubular Short Columns[J].China Concrete and Cement Products,2019(2):44-47.

浏览量:
1000
摘 要:采用统一强度理论对内圆外方复合钢管高强混凝土短柱的受压承载力进行了理论分析,考虑了内、外两层钢管对内层混凝土的双重约束作用以及中间主应力和偏心距的影响,分别推导得出了内圆外方复合钢管高强混凝土短柱轴心受压、偏心受压极限承载力计算公式。通过与相关文献资料试验实测数据进行对比,验证了公式的可行性和正确性,分析结果表明,内、外钢管对于其轴压极限承载力的主要贡献是对混凝土提供了约束作用,而不是自身的轴向承载贡献,研究成果可为工程实践提供参考。 Abstract: By using the Unified Strength Theory, the theoretical analysis on compression bearing capacity of the composite-sectioned high strength concrete filled steel tubular short columns is carried out. And the corresponding ultimate load calculation formulas are also obtained, in which the double restriction effect, the influence of intermediate principal stress and eccentricity are considered. The calculation results are compared with experimental data, and it is found that the calculation results and experimental data are more consistent, which indicates that the formulas are correct and feasible. The analysis results show that the main contribution of the inner and outer steel tubular to the ultimate bearing capacity of the axial compression members is the constraint effect on the concrete, not the axial bearing contribution of its own. The research results can provide a reference for the engineering practice.
英文名 : Calculation of Compression Bearing Capacity of Composite-sectioned High Strength Concrete Filled Steel Tubular Short Columns
刊期 : 2019年第2期
关键词 : 统一强度理论;复合钢管高强混凝土短柱;受压承载力计算
Key words : Unified strength theory; Composite-sectioned high strength concrete filled steel tubular short column; Calculation of compressio
刊期 : 2019年第2期
DOI : 10.19761/j.1000-4637.2019.02.044.04
文章编号 :
基金项目 : 国家自然基金资助项目(51308479);四川省科技厅应用基础项目(2018JY0443);四川省教育厅资助项目(18CZ0012);绵阳市科技攻关项目(15S-02-3)。
作者 : 张兆强
单位 : 西南科技大学土木工程与建筑学院,绵阳 621010

张兆强

张兆强.内圆外方复合钢管高强混凝土短柱受压承载力计算[J].混凝土与水泥制品,2019(2):44-47.

ZHANG Z Q.Calculation of Compression Bearing Capacity of Composite-sectioned High Strength Concrete Filled Steel Tubular Short Columns[J].China Concrete and Cement Products,2019(2):44-47.

摘要
参数
结论
参考文献
引用本文
摘   要:采用统一强度理论对内圆外方复合钢管高强混凝土短柱的受压承载力进行了理论分析,考虑了内、外两层钢管对内层混凝土的双重约束作用以及中间主应力和偏心距的影响,分别推导得出了内圆外方复合钢管高强混凝土短柱轴心受压、偏心受压极限承载力计算公式。通过与相关文献资料试验实测数据进行对比,验证了公式的可行性和正确性,分析结果表明,内、外钢管对于其轴压极限承载力的主要贡献是对混凝土提供了约束作用,而不是自身的轴向承载贡献,研究成果可为工程实践提供参考。
Abstract: By using the Unified Strength Theory, the theoretical analysis on compression bearing capacity of the composite-sectioned high strength concrete filled steel tubular short columns is carried out. And the corresponding ultimate load calculation formulas are also obtained, in which the double restriction effect, the influence of intermediate principal stress and eccentricity are considered. The calculation results are compared with experimental data, and it is found that the calculation results and experimental data are more consistent, which indicates that the formulas are correct and feasible. The analysis results show that the main contribution of the inner and outer steel tubular to the ultimate bearing capacity of the axial compression members is the constraint effect on the concrete, not the axial bearing contribution of its own. The research results can provide a reference for the engineering practice.
关键词:
统一强度理论;复合钢管高强混凝土短柱;受压承载力计算
扫二维码用手机看
未找到相应参数组,请于后台属性模板中添加

(1)采用统一强度理论对内圆外方复合钢管高强混凝土短柱的受压承载力进行了理论分析,得出了内圆外方复合钢管高强混凝土短柱轴心受压、偏心受压极限承载力的计算公式,分析过程中考虑了内、外两层钢管对内层混凝土的双重约束作用以及中间主应力和偏心距的影响。(2)通过计算结果与文献试验实测数据对比,两者符合较好,验证了基于统一强度理论所获得公式的可行性和正确性。

(3)在内圆外方复合钢管高强混凝土短柱中,内、外钢管对于其轴压极限承载力的主要贡献,在于其对混凝土提供的约束作用,而不是自身的轴向承载贡献。

[1] 顾欣欣,田安国,蔡小宁,等.钢管混凝土短柱补偿收缩试验研究[J].混凝土与水泥制品,2017(6):37-41.
[2] 梁炯丰,谢挺挺,郭立湘.CFRP方钢管再生混凝土短柱轴压试验研究[J].混凝土与水泥制品,2015(6):47-49.
[3] 蔡绍怀.现代钢管混凝土结构[M].北京:人民交通出版社,2007.  
[4] 张春梅,阴毅,周云.双钢管高强混凝土柱轴压承载力的试验研究[J].广州大学学报:自然科学版,2004(1):61-65.
[5] 张春梅,阴毅,周云.影响钢管混凝土柱轴压承载力的因素分析[J].工业建筑,2004(10):66-68.
[6] 江韩,左江,程文瀼.轴心受压双钢管混凝土短柱正截面承载力的试验研究[J].工程抗震与加固改造,2008(1):28-35. 
[7] 方小丹,林斯嘉.复式钢管高强混凝土柱轴压试验研究[J].建筑结构学报,2014(4):236-244.
[8] 裴万吉.复式钢管混凝土柱力学性能分析[D].西安:长安大学,2005.
[9] 钱稼茹,李宁波,纪晓东,等.复合钢管高强混凝土柱累积损伤性能试验研究[J].土木工程学报,2014(2):30-40.
[10] 钱稼茹,张扬,纪晓东,等.复合钢管高强混凝土短柱轴心受压性能试验与分析[J].建筑结构学报,2011(12):162-169.
[11] 钱稼茹,张扬,张微敬.双钢管高强混凝土短柱偏心受压性能试验[J].清华大学学报:自然科学版,2015(1):1-7.
[12] 张扬,钱稼茹,纪晓东,等.内圆外方复合钢管混凝土短柱轴压承载力试验研究[J].世界地震工程,2011(3):40-46.
[13] 陈建伟,苏幼坡,李欣,等.复式钢管混凝土柱轴压承载力计算方法对比分析[J].福州大学学报:自然科学版,2013(4):792-795.
[14] 张兆强,赵均海,姚勇.圆实复式钢管混凝土柱轴压承载力研究[J].西南科技大学学报:自然科学版,2008(1):8-13. 
[15] 俞茂宏.强度理论新体系[M].西安:西安交通大学出版社, 1992.
[16] 王菁,关罡,李四平.方钢管砼轴压柱承载力的计算[J].建筑结构,1997(5):13-15. 
[17] 李小伟,赵均海,朱铁栋,等.方钢管混凝土轴压短柱的力学性能[J].中国公路学报,2006(4):77-81.
[18] Kenji S,Hiroyuki N,Shosuke M,et al.Behavior of Centrally Loaded Concrete-Filled Steel-Tube Short Columns[J].Journal of Structural Engineering,2004(2):180-188.
[19] 赵均海.强度理论及其工程应用[M].北京:科学出版社, 2003.
[20] 中国工程建设标准化协会.CECS 28:2012钢管混凝土结构技术规程[S].北京:中国计划出版社,2012.

张兆强.内圆外方复合钢管高强混凝土短柱受压承载力计算[J].混凝土与水泥制品,2019(2):44-47.

ZHANG Z Q.Calculation of Compression Bearing Capacity of Composite-sectioned High Strength Concrete Filled Steel Tubular Short Columns[J].China Concrete and Cement Products,2019(2):44-47.

相关文件

暂时没有内容信息显示
请先在网站后台添加数据记录。

关注《混凝土与水泥制品》

总访问量 468,401   网站统计

官方微信公众号关闭
苏州混凝土水泥制品研究院有限公司

关于我们    |    联系我们    |    订购杂志    |    回到顶部

版权所有:中国混凝土与水泥制品网  苏ICP备10086386号   网站建设:中企动力 苏州

版权所有:中国混凝土与水泥制品网

苏ICP备10086386号

网站建设:中企动力 苏州