化学发泡泡沫混凝土裂缝的成因及控制措施
Cause and Controlling Measures of Cracks of Chemical Foaming Foam Concrete
关键词:
泡沫混凝土保温板;化学发泡;裂缝;平衡压板法
Key words:
Foam concrete insulation board; Chemical foaming; Crack; Balanced platen method
刊期:
2019年第3期
DOI:
10.19761/j.1000-4637.2019.03.064.04
文章编号:
基金项目:
浙江省公益性科技计划项目(2017C31074);嘉兴学院中澳先进材料与制造研究院培育项目(70117017)。
作者:
刘红飞1,薛力梨1,蒋元海1,沈 焱2,王香港2,鲍益伟3
单位:
1.嘉兴学院建筑工程学院,314001;2.苏州市兴邦化学建材有限公司,215155; 3.嘉兴市天元建筑保温材料有限公司,314001
摘要
摘 要:阐述了化学发泡法制备泡沫混凝土的过程,分析了泡沫混凝土裂缝产生的主要原因,并提出如何减少这些裂缝的措施。研究表明:新拌泡沫混凝土料浆的均匀性和稳定性是化学发泡泡沫混凝土产品质量的关键;发泡膨胀和凝结时呈现的不均匀性是裂缝产生的主要原因,温差应力是次要原因;研制的平衡压板法可有效减少泡沫混凝土料浆和胚体的裂缝。
Abstract: The process of making foamed concrete by chemical foaming method was represented, the main causes of foam concrete cracks were analyzed, measures of reducing the cracks were also offered. Researches show that the uniformity and stability of fresh foam concrete slurry is key to the quality of chemical foam concrete, then unevenness of foaming expansion and condensation is the main cause of cracks, and the thermal stress is the secondary cause, besides, balanced platen method could reduce the cracks effectively.
结论
参考文献
引用本文
刘红飞,薛力梨,蒋元海,等.化学发泡泡沫混凝土裂缝的成因及控制措施[J].混凝土与水泥制品,2019(3):64-67.
LIU H F,XUE L L,JIANG Y H,et al.Cause and Controlling Measures of Cracks of Chemical Foaming Foam Concrete[J].China Concrete and Cement Products,2019(3):64-67.
上一个: 玻璃轻石混凝土砌块孔型优化设计分析
下一个: 掺玄武岩纤维的水泥固化风积砂无侧限抗压强度试验研究
相关文件