苏州混凝土水泥制品研究院有限公司

头部文案

发布时间:2020-01-06 00:00:00
全国建材科技期刊
全国中文核心期刊
中国科技论文统计源期刊
万方数据-数字化期刊群入网期刊
中国学术期刊(光盘版)全文收录期刊
华东地区优秀科技期刊
江苏省期刊方阵“双效期刊”
中国期刊网全文收录期刊
中国科技期刊数据库全文收录期刊
预制混凝土内墙板立模生产工艺研究与应用
Research and Application of Precast Concrete Inner Wall Panel Manufacturing Technique by Using the Vertical Mold
2020年第12期
预制混凝土内墙板;立模;生产工艺;研究与应用
Precast concrete inner wall panel; Vertical mold; Manufacturing technique; Research and application
2020年第12期
10.19761/j.1000-4637.2020.12.059.04
国家重点研发计划项目(2017YFC0703704)。
赵志刚1,杨思忠2,任成传1,王文欢1,刘蕴哲1,王志礼1,王 群1,董铁良1
1.北京市燕通建筑构件有限公司,北京 102202;2.北京市住宅产业化股份集团有限公司, 北京 100161

赵志刚1,杨思忠2,任成传1,王文欢1,刘蕴哲1,王志礼1,王 群1,董铁良1

赵志刚,杨思忠,任成传,等.预制混凝土内墙板立模生产工艺研究与应用[J].混凝土与水泥制品,2020(12):59-62.

ZHAO Z G,YANG S Z,REN C C,et al.Research and Application of Precast Concrete Inner Wall Panel Manufacturing Technique by Using the Vertical Mold[J].CHINA CONCRETE AND CEMENT PRODUCTS,2020(12):59-62.

浏览量:
1000
摘   要:结合开发的自动化成组立模设备,研究并优化了快速组模、预埋件定位、模板变形和漏浆控制、浇筑振捣和自动养护等关键工艺环节,解决了预制混凝土内墙板立模生产的技术难题。通过工程应用,说明了立模生产的内墙板相比平模在质量上有明显提升。采用立模除了可节省空间外,生产效率大大提高,能耗明显降低,社会和经济效益显著。 Abstract: In combination with the developed automatic group vertical mold equipment, the key technologies such as rapid mold forming, embedded part positioning, formwork deformation and slurry leakage control, casting and vibration,automatic curing are studied and optimized, and the technical difficulties in precast concrete inner wall panel manufacturing technique by using the vertical mold are solved. Through the engineering application, it is shown that the quality of the inner wall panel produced by the vertical mold is significantly improved compared with that of the flat mold.In addition to greatly saving space, the use of the vertical mold greatly improves production efficiency, significantly reduces energy consumption, and has significant social and economic benefits.
英文名 : Research and Application of Precast Concrete Inner Wall Panel Manufacturing Technique by Using the Vertical Mold
刊期 : 2020年第12期
关键词 : 预制混凝土内墙板;立模;生产工艺;研究与应用
Key words : Precast concrete inner wall panel; Vertical mold; Manufacturing technique; Research and application
刊期 : 2020年第12期
DOI : 10.19761/j.1000-4637.2020.12.059.04
文章编号 :
基金项目 : 国家重点研发计划项目(2017YFC0703704)。
作者 : 赵志刚1,杨思忠2,任成传1,王文欢1,刘蕴哲1,王志礼1,王 群1,董铁良1
单位 : 1.北京市燕通建筑构件有限公司,北京 102202;2.北京市住宅产业化股份集团有限公司, 北京 100161

赵志刚1,杨思忠2,任成传1,王文欢1,刘蕴哲1,王志礼1,王 群1,董铁良1

赵志刚,杨思忠,任成传,等.预制混凝土内墙板立模生产工艺研究与应用[J].混凝土与水泥制品,2020(12):59-62.

ZHAO Z G,YANG S Z,REN C C,et al.Research and Application of Precast Concrete Inner Wall Panel Manufacturing Technique by Using the Vertical Mold[J].CHINA CONCRETE AND CEMENT PRODUCTS,2020(12):59-62.

摘要
参数
结论
参考文献
引用本文

摘   要:结合开发的自动化成组立模设备,研究并优化了快速组模、预埋件定位、模板变形和漏浆控制、浇筑振捣和自动养护等关键工艺环节,解决了预制混凝土内墙板立模生产的技术难题。通过工程应用,说明了立模生产的内墙板相比平模在质量上有明显提升。采用立模除了可节省空间外,生产效率大大提高,能耗明显降低,社会和经济效益显著。

Abstract: In combination with the developed automatic group vertical mold equipment, the key technologies such as rapid mold forming, embedded part positioning, formwork deformation and slurry leakage control, casting and vibration,automatic curing are studied and optimized, and the technical difficulties in precast concrete inner wall panel manufacturing technique by using the vertical mold are solved. Through the engineering application, it is shown that the quality of the inner wall panel produced by the vertical mold is significantly improved compared with that of the flat mold.In addition to greatly saving space, the use of the vertical mold greatly improves production efficiency, significantly reduces energy consumption, and has significant social and economic benefits.

扫二维码用手机看
未找到相应参数组,请于后台属性模板中添加

(1)结合开发的自动化成组立模设备,研究并优化了快速组模、预埋件定位、模板变形和漏浆控制、浇筑振捣和自动养护等关键工艺,解决了立模生产内墙板的关键技术难题。
(2)通过工程应用,说明了立模生产的内墙板相比平模质量明显提升,采用立模除了大大提高单位面积厂房产能外,生产效率也明显提高(人均产能提高3~5倍、生产周转次数提高20%~25%),养护能耗也明显降低,社会和经济效益显著。

[1] 王晓锋.浅议我国装配式混凝土结构发展与标准规范[J].住宅与房地产,2017(2):45-48.
[2] 戴大力.装配式建筑主要存在的问题与对策研究[J].混凝土与水泥制品,2019(8):77-79.
[3] 苏永波,王肖方,单贺明.装配式住宅工程产业化施工措施分析[J].混凝土与水泥制品,2019(10):84-87.
[4] 刘大胜,蒋勤俭,黄清杰,等.预制混凝土构件工厂全国重点区域规划布局研究[J].混凝土与水泥制品,2019(9):77-79.
[5] 孙志超,于海滨,蔡海宁.大型预制构件成组立模成型设备研究与应用[J].建筑技术,2018(S1):227-228.

赵志刚,杨思忠,任成传,等.预制混凝土内墙板立模生产工艺研究与应用[J].混凝土与水泥制品,2020(12):59-62.

ZHAO Z G,YANG S Z,REN C C,et al.Research and Application of Precast Concrete Inner Wall Panel Manufacturing Technique by Using the Vertical Mold[J].CHINA CONCRETE AND CEMENT PRODUCTS,2020(12):59-62.

相关文件

暂时没有内容信息显示
请先在网站后台添加数据记录。

关注《混凝土与水泥制品》

总访问量 468,401   网站统计

官方微信公众号关闭
苏州混凝土水泥制品研究院有限公司

关于我们    |    联系我们    |    订购杂志    |    回到顶部

版权所有:中国混凝土与水泥制品网  苏ICP备10086386号   网站建设:中企动力 苏州

版权所有:中国混凝土与水泥制品网

苏ICP备10086386号

网站建设:中企动力 苏州