混凝土3D打印质量影响因素及控制方法_《混凝土与水泥制品》杂志社

头部文案

发布时间：2020-01-06 00:00:00

全国建材科技期刊
全国中文核心期刊
中国科技论文统计源期刊
万方数据-数字化期刊群入网期刊
中国学术期刊（光盘版）全文收录期刊

华东地区优秀科技期刊
江苏省期刊方阵“双效期刊”
中国期刊网全文收录期刊
中国科技期刊数据库全文收录期刊



混凝土3D打印质量影响因素及控制方法

Influencing Factors and Control Measures of Concrete 3D Printing Quality

2021年第4期

混凝土；3D打印；打印质量；影响因素；质量控制方法

Concrete; 3D printing; Printing quality; Influencing factor; Quality control measure

2021年第4期

10.19761/j.1000-4637.2021.04.011.06

“十三五”国家重点研发计划项目（2019YFC1907105）；中交集团2020重大研发项目（2020-ZJKJ-07）；中交集团特大研发项目（2018-ZJKJ-02）。

杨敏，来猛刚，窦艳宁，田果

中交第一公路勘察设计研究院有限公司，陕西西安 710065

杨敏，来猛刚，窦艳宁，田果

杨敏,来猛刚,窦艳宁,等.混凝土3D打印质量影响因素及控制方法[J].混凝土与水泥制品,2021(4):11-16.

YANG M,LAI M G,DOU Y N,et al.Influencing Factors and Control Measures of Concrete 3D Printing Quality[J].CHINA CONCRETE AND CEMENT PRODUCTS,2021(4):11-16.

浏览量:

1000

摘要：为更好地控制混凝土3D打印构件的成型质量，从构件造型实现程度、成型精度、表面纹理质量、力学性能、非薄壁构件的填充质量等方面介绍了混凝土3D打印质量评价指标。结合混凝土3D打印技术流程，研究了影响3D打印质量的主要因素，如打印材料、打印设备、控制系统、切片及路径规划算法、控制参数、打印环境条件等。并针对主要影响因素，采用定性分析与理论分析相结合的方法，提出了其相应的质量控制方法。 Abstract: In order to control the forming quality of concrete 3D printing components, a set of quality evaluation index of concrete 3D printing was introduced from the aspects of the realization degree of printing parts, forming precision, surface texture quality, mechanical properties of printing parts, filling quality of non thin-walled components. Combined with the whole technical process of concrete 3D printing, the main quality influencing factors were studied, including printing materials, printing equipment, control system, slicing and path planning algorithm, control parameters, printing environment conditions and so on. According to the main influencing factors, qualitative analysis and theoretical analysis were combined to further analyze, and the corresponding quality control measures were put forward.

英文名 : Influencing Factors and Control Measures of Concrete 3D Printing Quality

刊期 : 2021年第4期

关键词 : 混凝土；3D打印；打印质量；影响因素；质量控制方法

Key words : Concrete; 3D printing; Printing quality; Influencing factor; Quality control measure

刊期 : 2021年第4期

DOI : 10.19761/j.1000-4637.2021.04.011.06

文章编号 :

基金项目 : “十三五”国家重点研发计划项目（2019YFC1907105）；中交集团2020重大研发项目（2020-ZJKJ-07）；中交集团特大研发项目（2018-ZJKJ-02）。

作者 : 杨敏，来猛刚，窦艳宁，田果

单位 : 中交第一公路勘察设计研究院有限公司，陕西西安 710065

杨敏，来猛刚，窦艳宁，田果

杨敏,来猛刚,窦艳宁,等.混凝土3D打印质量影响因素及控制方法[J].混凝土与水泥制品,2021(4):11-16.

YANG M,LAI M G,DOU Y N,et al.Influencing Factors and Control Measures of Concrete 3D Printing Quality[J].CHINA CONCRETE AND CEMENT PRODUCTS,2021(4):11-16.





摘要

参数

结论

参考文献

引用本文

Abstract: In order to control the forming quality of concrete 3D printing components, a set of quality evaluation index of concrete 3D printing was introduced from the aspects of the realization degree of printing parts, forming precision, surface texture quality, mechanical properties of printing parts, filling quality of non thin-walled components. Combined with the whole technical process of concrete 3D printing, the main quality influencing factors were studied, including printing materials, printing equipment, control system, slicing and path planning algorithm, control parameters, printing environment conditions and so on. According to the main influencing factors, qualitative analysis and theoretical analysis were combined to further analyze, and the corresponding quality control measures were put forward.

扫二维码用手机看

[1] WOLFS R J M.3D printing of concrete structures[D].The Netherlands:Eindhoven University of Technology,2015.
[2] PAUL S C,VAN ZIJL G P A G,TAN M J,et al.A review of 3D concrete printing systems and materials properties: current status and future research prospects[J].Rapid Prototyping Journal,2018,24(4):784-798.
[3] 郭潞杰.分层叠加打印混凝土构件精度控制技术研究[D].南京:东南大学,2020.
[4] NERELLA V N,KRAUSE M,N?魧THER M,et al.Studying printability of fresh concrete for formwork free Concrete on-site 3D Printing technology(CONPrint3D)[C].Germany:25th Conference on Rheology of Building Materials,2016.
[5] PERROT A,RANGEARD D,PIERRE A.Structural built-upof cement-based materials used for 3D-printing extrusion techniques[J].Materials and Structures,2015,49(4):1-8.
[6] LE T T,AUSTIN S A,LIM A,et al.Hardened properties of high-performance printing concrete[J].Cement and Concrete Research,2012,42(3):558-566.
[7] LIM S,BUSWELL R,LE T,et al.Development of a viable concrete printing process[C].Seoul:In: proceeding for 28th International Symposium on Automation and Robotics in Construction(ISARC2011),2011:665-670.
[8] 武雷,孙远,杨威.3D打印混凝土层间粘接强度增强技术及试验研究[J].混凝土与水泥制品,2020(7):1-6.
[9] 武雷,郭潞杰,康强.3D打印混凝土工艺参数对成型精度的影响[J].混凝土与水泥制品,2020(11):1-5.
[10] 楚宇扬,徐金涛,刘烨,等.快硬硫铝酸盐水泥在3D打印材料中的应用[J/OL].建筑材料学报,2020(8):11[2020-08-18].https://kns.cnki.net/kcms/detail/31.1764.TU.20200818.1005.014.html.
[11] LE T T,AUSTIN S A,LIM S,et al.Mix design and fresh properties for high-performance printing concrete[J].Materials and Structures,2012,45(8):1221-1232.
[12] 段严,秦先涛.3D打印混凝土相关性能研究进展[J].混凝土与水泥制品,2020(9):5-10.
[13] 於家勉,孙元峰,姚一鸣,等.3D打印混凝土层间性能影响因素与测试方法研究综述[J].混凝土与水泥制品,2020(8):7-11.
[14] KAZEMIAN A,YUAN X,COCHRAN E,et al.Cementitious materials for construction-scale 3D printing: Laboratory testing of fresh printing mixture[J].Construction and Building Materials, 2017,145:639-647.
[15] ZHANG C,HOU Z,CHEN C,et al.Design of 3D printable concrete based on the relationship between flowability of cement paste and optimum aggregate content[J].Cement and Concrete Composites,2019,104:103406.

上一个

中老磨万铁路复杂环境下混凝土力学性能试验研究

下一个

纳米SiO2改性陶粒混凝土冻融损伤规律及模型研究

头部文案

混凝土3D打印质量影响因素及控制方法

相关文件