[1] WANG J,ZHANG Y Y,CUI K K,et al.Pyrometallurgical Recovery of Zinc and Valuable Metals from Electric Arc Furnace Dust-A Review[J].Journal of Cleaner Production,2021,298:1-23.
[2] LANZERATORFER C.Electric Arc Furnace(EAF) Dust: Application of Air Classification for Improved Zinc Enrichment in In-plant Rcycling[J].Journal of Cleaner Production,2018,174:1-6.
[3] VARGAS D A S,MASUERO ?魨 B,VILELA A C F.Investigations on the Use of Electric-arc Furnace Dust(EAFD) in Pozzolan-modified Portland Cement Ⅰ(MP) Pastes[J].Cement and Concrete Research,2006,36:1833-1841.
[4] NIKOLIC I,DUROVIC D,MARKOVIC S,et al.Alkali Activated Slag Cement Doped with Zn-rich Electric Arc Furnace Dust[J].Journal of Materials Research and Technology,2020,9(6):12783-12794.
[5] BUZIN P J W K,HECK N C,VILELA A C F.EAF Dust: An Overview on the Influences of Physical, Chemical and Mineral Features in Its Recycling and Waste Incorporation Routes[J].Journal of Materials Research and Technology,2017,6(2):194-202.
[6] PELINO M,KARAMANOV A,PISCIELLA P,et al.Vitrification of Electric Arc Furnace Dusts[J].Waste Management,2002,22:945-949.
[7] GU?魪ZENNE A G,HUBER J C,PATISSON F,et al.Dust Formation in Electric Arc Furnace: Birth of the Particles[J].Powder Technology,2005,157:2-11.
[8] SUETENS T,GUO M,ACKER K V,et al.Formation of the ZnFe2O4 in an Electric Arc Furnace Off-gas Treatment System[J].Journal of Hazardous Materials,2015,287:180-187.
[9] SOFILIC T,MIOC A R,STEFANOVIC S C,et al.Characterization of Steel Mill Electric-arc Furnace Dust[J].Journal of Hazardous Materials,2004,109(1-3):59-70.
[10] MACHADO J G M S,BREHM F A,MORAES C A M,et al.Chemical, Physical, Structural and Morphological Characterization of the Electric Arc Furnace Dust[J].Journal of Hazardous Materials,2006,136(3):953-960.
[11] SIMONYAN L M,ALPATOVA A A,DEMIDOVA N V.The EAF Dust Chemical and Phase Composition Research Techniques[J].Journal of Materials Research and Technology,2019,8(2):1601-1607.
[12] WANG H G,LI J W,HUO X T,et al.Magnetic Ni-Zn Spinel Ferrite Nanopowder from Toxic Zn-bearing Electric Arc Furnace Dust: A Promising Treatment Process[J].Minerals Engineering,2020,157:1-8.
[13] LI Y,MENG X Y,CHEN K Y,et al.Crystallization Behaviors of Spinel During Cooling Process of Modified EAF Slag[J].Metallurgical and Materials Transations B,2020,51:1027-1038.
[14] AL-ZAID R Z,AL-SUGAIR F H,AL-NEGHEIMISH A I.Investigation of Potential Uses of Electric-arc Furnace Dust(EAFD) in Concrete[J].Cement and Concrete Research,1997,27(2):267-278.
[15] MASSARWEH O,MASLEHUDDIN M,AL-DULAIJAN S U,et al.Development of a Concrete Set Retarder Utilizing Electric Arc Furnace Dust[J].Construction and Building Materials,2020,255:1-11.
[16] FARES G,AL-ZAID R Z,FAUZI A,et al.Performance of Optimized Electric Arc Furnace Dust-based Cementitious Matrix Compared to Conventional Supplementary Cementitious Materials[J].Construction and Building Materials,2016,112:210-221.
[17] MAGALH?魨ES M D S,FALESCHINI F,PELLEGRINO C,et al.Cementing Efficiency of Electric Arc Furnace Dust in Mortars[J].Construction and Building Materials,2017,157:141-150.
[18] ALIZADEH M,MOMENI M.The Effect of the Scrap/DRI Ratio on the Specification of the EAF Dust and Its Influence on Mechanical Properties of the Concrete Treated by Its Dust[J].Construction and Building Materials,2016,112:1074-1045.
[19] LOZANO-LUNAR A,SILVA P R D,BRITO J D,et al.Safe Use of Electric Arc Furnace Dust as Secondary Raw Material in Selfcompacting Mortars Production[J].Journal of Cleaner Production,2019(12):1375-1388.
[20] LEDESMA E F,JIM?魪NEZ J R,AYUSO J,et al.Experimental Study of the Mechanical Stabilization of Electric Arcfurnace Dust Using Fluid Cement Mortars[J].Journal of Hazardous Materials,2017,326:26-35.
[21] COLORADO H A,GARCIA E,BUCHELY M F.White Ordinary Portland Cement Blended with Superfine Steel Dust with High Zinc Oxide Contents[J].Construction and Building Materials,2016,112:816-824.
[22] BREHM F A,MORAES C A M,MODOLO R C E,et al.Oxide Zinc Addition in Cement Paste Aiming Electric Arc Furnace Dust (EAFD) Recycling[J].Construction and Building Materials,2017,139:172-182.
[23] SALIHOGLU G,PINARLI V.Steel Foundry Electric Arc Furnace Dust Management: Stabilization by Using Lime and Portland Cement[J].Journal of Hazardous Materials,2008,153:1110-1116.
[24] HEKAL E E,ABO-EL-ENEIN S A,EL-KORASHY S A,et al.Utilization of Electric Arc Furnace Dust as an Admixture to Portland Cement Pastes[J].Journal of Thermal Analysis and Calorimetry,2013,114(2):613-619.
[25] RAMADAN M,AMIN M S,SAYED M A.Superior Physico-mechanical, Fire Resistivity, Morphological Characteristics and Gamma Radiation Shielding of Hardened OPC Pastes Incorporating ZnFe2O4 Spinel Nanoparticles[J].Construction and Building Materials,2020,234:117807.
[26] ASAVAPISIT S,FOWLER G,CHEESEMAN C R.Solution Chemistry During Cement Hydration in the Presence of Metal Hydroxide Wastes[J].Cement and Concrete Research,1997,27(8):1249-1260.
[27] NOCHAIYA T,SEKINE Y,CHOOPUN S,et al.Microstructure, Characterizations, Functionality and Compressive Strength of Cement-based Materials Using Zinc Oxide Nanoparticles as an Sdditive[J].Journal of Alloys and Compounds,2015,630:1-10.
[28] MAGALH?魨ES M S,FALESCHINI F,PELLEGRINO C,et al.Influence of Alkali Addition on the Setting and Mechanical Behavior of Cement Pastes and Mortars with Electric Arc Furnace Dust[J].Construction and Building Materials,2019,214:413-419.
[29] ARNOLD M C,VARGAS A S D,BIANCHINI L.Study of Electric-arc Furnace Dust (EAFD) in Fly Ash and Rice Husk Ash-based Geopolymers[J].Advanced Powder Technology,2017,28:2023-2034.
[30] CHOLAKE S T,FARZANA R,NUMATA T.Transforming Electric Arc Furnace Waste into Value Added Building Products[J].Journal of Cleaner Production,2018,171:1128-1139.