[1] SIVARUPAN T,BALASUBRAMANI N,SAXENA P,et al.A Review on the Progress and Challenges of Binder Jet 3D Printing of Sand Moulds for Advanced Casting[J].Additive Manufacturing,2021,40:101889.
[2] 盛蕾,武雷.3D打印混凝土技术研究综述[J].混凝土与水泥制品,2021(10):1-5.
[3] 史玉升,张李超,白宇,等.3D打印技术的发展及其软件实现[J].中国科学:信息科学,2015,45(2):197-203.
[4] 王忠宏,李扬帆,张曼茵.中国3D打印产业的现状及发展思路[J].经济纵横,2013(1):90-93.
[5] PENG X,KONG L B,FUH J Y H,et al.A Review of Post-processing Technologies in Additive Manufacturing[J].Journal of Manufacturing and Materials Processing,2021,5(2):38-60.
[6] 朱艳青,史继富,王雷雷,等.3D打印技术发展现状[J].制造技术与机床,2015(12):50-57.
[7] ZHANG J,KHOSHNEVIS B.Optimal Machine Operation Planning for Construction by Contour Crafting[J].Automation in Construction,2013,29(5):50-67.
[8] LIM S,BUSWELL R A,LE T T,et al.Developments in Construction-scale Additive Manufacturing Processes[J].Automation in Construction,2011,21(5):262-268.
[9] CESARETTI G,DINI E,KESTELIER X D,et al.Building Components for an Outpost on the Lunar Soil by Means of a Novel 3D Printing Technology[J].Acta Astronautica,2014,93(5):430-450.
[10] SACHS E,CIMA M,CORIE J,et al.Three-dimensional Printing:the Physics and Implications of Additive Manufacturing[J].CIRP Annals,1993,42(1):257-260.
[11] LOWKE D,DINI E,PERROT A,et al.Particle-bed 3D Printing in Concrete Construction-possibilities and Challenges[J].Cement and Concrete Research,2018,112(10):50-65.
[12] MA G W,WANG L,JU Y.State-of-the-art of 3D Printing Technology of Cementitious Material-an Emerging Technique for Construction[J].Science China(Technological Sciences),2018,61(4):475-495.
[13] 刘凯,倪俣,段少强,等.三维打印磷酸镁水泥复杂艺术品的工艺研究[J].硅酸盐通报,2018,37(9):2888-2892.
[14] XU J B,CHEN M X,ZHAO Z H,et al.Printability and Efflorescence Control of Admixtures Modified 3D Printed White Portland Cement-based Materials Based on the Response Surface Methodology[J].Journal of Building Engineering,2021,38(6):102208.
[15] MAIER A K,DEZMIREAN L,WILL J,et al.Three-dimensional Printing of Flash-setting Calcium Aluminate Cement[J].Journal of Materials Science,2011,46(9):2947-2954.
[16] DEMONT L,DUCOULOMBIER N,MESNIL R,et al.Flow-based Pultrusion of Continuous Fibers for Cement-based Composite Material and Additive Manufacturing:Rheological and Technological Requirements[J].Composite Structures,2021,262:113564.
[17] BUTSCHER A,BOHNER M,ROTH C,et al.Printability of Calcium Phosphate Powders for Three-dimensional Printing of Tissue Engineering Scaffolds[J].Acta Biomaterialia,2012,8(1):373-385.
[18] SCHULZE D.Zur Fliessfahigkeit von Schuttgutern-Definition und Messverfahren[J].Schuttguttechnik,2015,67:60-68.
[19] ZHOU Z X,BUCHANAN F,MITCHELL C,et al.Printability of Calcium Phosphate:Calcium Sulfate Powders for the Application of Tissue Engineered Bone Scaffolds Using the 3D Printing Technique[J].Materials Science and Engineering:C,2014,38(5):1-10.
[20] XIA M,NEMATOLLAHI B,SANJAYAN J.Influence of Binder Saturation Level on Compressive Strength and Dimensional Accuracy of Powder-based 3D Printed Geopolymer[J].Materials Science Forum,2018,939:177-183.
[21] MOSTAFAEI A,VECCHIS P R D,NETTLESHIP I,et al.Effect of Powder Size Distribution on Densification and Microstructural Evolution of Binder-jet 3D-printed Alloy 625[J].Materials and Design,2019,162(1):375-383.
[22] MIAO Y H,LIU X,HOU Y,et al.Packing Characteristics of Aggregate with Consideration of Particle Size and Morphology[J].Applied Sciences,2019,9(5):869-886.
[23] ZIEGELMEIER S,CHRISTOU P,WOLLECKE F,et al.An Experimental Study into the Effects of Bulk and Flow Behaviour of Laser Sintering Polymer Powders on Resulting Part Properties[J].Journal of Materials Processing Technology,2015,215(1):239-250.
[24] XIA M,NEMATOLLAHI B,SANJAYAN J.Printability,Accuracy and Strength of Geopolymer Made Using Powder-based 3D Printing for Construction Applications[J].Automation in Construction,2019,101:179-189.
[25] SPATH S,SEITZ H.Influence of Grain Size and Grain-size Distribution on Workability of Granules with 3D Printing[J].The International Journal of Advanced Manufacturing Technology, 2014,70:135-144.
[26] CHEN H,WEI Q S,WEN S F,et al.Flow Behavior of Powder Particles in Layering Process of Selective Laser Melting:Numerical Modeling and Experimental Verification Based on Discrete Element Method[J].International Journal of Machine Tools and Manufacture,2017,123(12):146-159.
[27] 张迪湦,杨建明,黄大志,等.3DP法三维打印技术的发展与研究现状[J].制造技术与机床,2017(3):38-43.
[28] DENESUK M,SMITH G L,ZELINSKI B J J,et al.Capillary Penetration of Liquid Droplets into Porous Materials[J].Academic Press,1993,158(1):114-120.
[29] DENESUK M,ZELINSKI B J J,KREIDL N,et al.Dynamics of Incomplete Wetting on Porous Materials[J].Academic Press,1994,168(1):142-151.
[30] 金枫.基于粘结剂喷射的喷墨砂型三维打印技术新进展[J].机电工程技术,2018,47(9):109-114.
[31] SHAKOR P,SANJAYAN J,NAZARI A,et al.Modified 3D Printed Powder to Cement-based Material and Mechanical Properties of Cement Scaffold Used in 3D Printing[J].Construction and Building Materials,2017,138(5):398-409.
[32] IRSEN S H,LEUKERS B,HOECKLING C,et al.Bioceramic Granulates for Use in 3D Printing:Process Engineering Aspects[J].Materialwissenschaft und Werkstofftechnik,2006,37(6):533-537.
[33] SHERWOOD J K,RILEY S L,PALAZZOLO R,et al.A Three-dimensional Osteochondral Composite Scaffold for Articular Cartilage Repair[J].Biomaterials,2002,23(24):4739-4751.[34] SEIDENSTUECKER M,KERR L,BERNSTEIN A,et al.3D Powder Printed Bioglass and β-tricalcium Phosphate Bone Scaffolds[J].Materials,2018,11(1):11010013.
[35] WILL J,MELCHER R,TREUL C,et al.Porous Ceramic Bone Scaffolds for Vascularized Bone Tissue Regeneration[J].Journal of Materials Science:Materials in Medicine,2008,19:2781-2790.
[36] 王位,陆亚林,杨卓如.三维快速成型打印机成型材料[J].铸造技术,2012,33(1):103-106.
[37] VAEZI M,CHUA C K.Effects of Layer Thickness and Binder Saturation Level Parameters on 3D Printing Process[J].The International Journal of Advanced Manufacturing Technology,2011,53(1):275-284.
[38] 张鸿海,朱天柱,曹澍,等.基于喷墨打印机的三维打印快速成型系统开发及实验研究[J].机械设计与制造,2012(7):122-124.
[39] GONZALEZ J A,MIRELES J,LIN Y,et al.Characterization of Ceramic Components Fabricated Using Binder Jetting Additive Manufacturing Technology[J].Ceramics International,2016,42(9):10559-10564.
[40] 曹珊,李淑娟.三维打印技术工艺参数对制件表面形貌的影响[J].机械科学与技术,2012,31(7):1079-1084.
[41] SIMCHI A.The Role of Particle Size on the Laser Sintering of Iron Powder[J].Metallurgical and Materials Transactions B,2004,35(5):937-948.
[42] MOSTAFAEI A,ELLIOTT A M,BARNES J E,et al.Binder Jet 3D Printing-process Parameters, Materials, Properties,and Challenges[J].Progress in Materials Science,2020,119(4):100707.
[43] FENG P,MENG X M,CHEN J F,et al.Mechanical Properties of Structures 3D Printed with Cementitious Powders[J].Construction and Building Materials,2015,93(5):486-497.
[44] MIYANAJI H,ZHANG S S,LASSELL A,et al.Optimal Process Parameters for 3D Printing of Porcelain Structures[J].Procedia Manufacturing,2016,5:880-887.
[45] RAMAKRISHNAN N,RAJESH P K,PONNAMBALAM P,et al.Studies on Preparation of Ceramic Inks and Simulation of Drop Formation and Spread in Direct Ceramic Inkjet Printing[J]. Journal of Materials Processing Technology,2005,169(3):372-381.
[46] MIYANAJI H,MOMENZADEH N,YANG L.Effect of Printing Speed on Quality of Printed Parts in Binder Jetting Process[J].Additive Manufacturing,2018,20(5):1-10.
[47] SHRESTHA S,MANOGHARAN G.Optimization of Binder Jetting Using Taguchi Method[J].JOM,2017,69(3):491-497.
[48] SHANJANI Y,HU Y X,PILLIAR R M,et al.Mechanical Characteristics of Solid-freeform-fabricated Porous Calcium Polyphosphate Structures with Oriented Stacked Layers[J].Acta Biomaterialia,2011,7(4):1788-1796.
[49] XIA M,SANJAYAN J.Method of Formulating Geopolymer for 3D Printing for Construction Applications[J].Materials and Design,2016,110(5):382-390.
[50] XIA M,SANJAYAN J G.Methods of Enhancing Strength of Geopolymer Produced From Powder-based 3D Printing Process[J].Materials Letters,2018,227(5):281-283.
[51] NEMATOLLAHI B,XIA M,SANJAYAN J.Post-processing Methods to Improve Strength of Particle-bed 3D Printed Geopolymer for Digital Construction Applications[J].Frontiers in Materials,2019,6(5):1-10.
[52] 童飞飞,栾仲豪,马国伟.硫铝酸盐水泥基材料在3DP模型打印中的应用研究[J].混凝土,2021(7):155-160.
[53] SCHUTTER G D,LESAGE K,MECHTCHERINE V,et al.Vision of 3D Printing with Concrete—technical, Economic and Environmental Potentials[J].Cement and Concrete Research, 2018,112(4):25-36.
[54] GUAN G Y,HIRSCH M,SYAM W P,et al.Loose Powder Detection and Surface Characterization in Selective Laser Sintering Via Optical Coherence Tomography[J].Proceedings of the Royal Society A:Mathematical,Physical and Engineering Sciences,2016,472(7):20160201.
[55] PROMAKHOV V V,ZHUKOV A S,VOROZHTSOV A B,et al.Structure and Mechanical Properties of 3D-printed Ceramic Specimens[J].Russian Physics Journal,2019,62(5):876-881.
[56] PEGNA J.Application of Cementitious Bulk Materials to Site Processed Solid Freeform Construction, Proceedings on the Solid Freeform Fabrication Symposium[C]//Annual International in Person Solid Freeform Fabrication Symposium.1995 International Solid Freeform Fabrication Symposium.Texas:Annual International in Person Solid Freeform Fabrication Symposium,1995:39-45.
[57] COLLA V,ENRICO D.Large Scale 3D Printing:From Deep Sea to the Moon, in "Low-cost 3D Printing for Science, Education and Sustainable Development[EB/OL].(2013-01-20)[2021-09-22].https://www.researchgate.net/publication/286777060.
[58] XIA M,NEMATOLLAHI B,SANJAYAN J.Compressive Strength and Dimensional Accuracy of Portland Cement Mortar Made Using Powder-based 3D Printing for Construction AppliCations [C]//Swiss National Centre.First RILEM International Conference on Concrete and Digital Fabrication.Zurich:Swiss National Centre,2018:245-254.
[59] WEGER D,GEHLEN C.Particle-bed Binding by Selective Paste Intrusion—strength and Durability of Printed Fine-grain Concrete Members[J].Materials,2021,14(3):586-603.
[60] RAEL R,FRATELLO V S.Rael San Fratello[EB/OL].(2017-09-20)[2021-09-22].http://www.rael-sanfratello.com/.
