压力成型对砂浆孔结构、强度及分形维数的影响

头部文案

发布时间：2020-01-06 00:00:00

全国建材科技期刊
全国中文核心期刊
中国科技论文统计源期刊
万方数据-数字化期刊群入网期刊
中国学术期刊（光盘版）全文收录期刊

华东地区优秀科技期刊
江苏省期刊方阵“双效期刊”
中国期刊网全文收录期刊
中国科技期刊数据库全文收录期刊



压力成型对砂浆孔结构、强度及分形维数的影响

Influence of Pressure Forming on Pore structure, Strength and Fractal Dimension of Mortar

2023年第4期

压力成型；抗压强度；孔结构；分形维数；压汞法

Pressure molding; Compressive strength; Pore structure; Fractal dimension; Mercury intrusion porosimetre

2023年第4期

10.19761/j.1000-4637.2023.04.034.05

于成鑫，闫浩康，王硕，岳雪涛

山东建筑大学材料科学与工程学院，山东济南 250101

于成鑫，闫浩康，王硕，岳雪涛

于成鑫,闫浩康,王硕,压力成型对砂浆孔结构、强度及分形维数的影响[J].混凝土与水泥制品,2023(4):34-38.

YU C X,YAN H K,WANG S,et al.Influence of Pressure Forming on Pore structure, Strength and Fractal Dimension of Mortar[J].China Concrete and Cement Products,2023(4):34-38.

浏览量:

1000

摘要：采用压汞法测试了不同初始加压时间水泥砂浆的孔结构参数，并计算孔分形维数，研究了初始加压时间与抗压强度、孔结构、孔分形维数之间的关系。结果表明：初始加压时间对砂浆孔隙率和抗压强度的影响显著，加压时间过早或过晚均不利于砂浆抗压强度的发展，初始加压时间宜为养护2.5 h左右；压力成型下砂浆的孔结构具有明显的分形特征，孔分形维数范围为3.0~3.2，孔分形维数与孔隙率存在良好的相关性，能够在一定程度上反映水泥基材料宏观性能的优劣。 Abstract: The pore structure parameters of cement mortar with different initial compression time were measured by mercury intrusion porosimetre, and the pore fractal dimension was calculated. The relationship between initial compression time and compressive strength, pore structure and pore fractal dimension was studied. The results show that the initial compression time has a significant impact on the porosity and compressive strength of the mortar. The early or late compression time is not conducive to the development of the mortar compressive strength. The initial compression time should be after 2.5 h curing. The pore structure of mortar under pressure molding has obvious fractal characteristics, with fractal dimension ranging from 3.0 to 3.2. There is a good correlation between pore fractal dimension and porosity, which can reflect the advantages and disadvantages of the macro performance of cement-based material to a certain extent.

英文名 : Influence of Pressure Forming on Pore structure, Strength and Fractal Dimension of Mortar

刊期 : 2023年第4期

关键词 : 压力成型；抗压强度；孔结构；分形维数；压汞法

Key words : Pressure molding; Compressive strength; Pore structure; Fractal dimension; Mercury intrusion porosimetre

刊期 : 2023年第4期

DOI : 10.19761/j.1000-4637.2023.04.034.05

文章编号 :

基金项目 :

作者 : 于成鑫，闫浩康，王硕，岳雪涛

单位 : 山东建筑大学材料科学与工程学院，山东济南 250101

于成鑫，闫浩康，王硕，岳雪涛

于成鑫,闫浩康,王硕,压力成型对砂浆孔结构、强度及分形维数的影响[J].混凝土与水泥制品,2023(4):34-38.

YU C X,YAN H K,WANG S,et al.Influence of Pressure Forming on Pore structure, Strength and Fractal Dimension of Mortar[J].China Concrete and Cement Products,2023(4):34-38.





摘要

参数

结论

参考文献

引用本文

Abstract: The pore structure parameters of cement mortar with different initial compression time were measured by mercury intrusion porosimetre, and the pore fractal dimension was calculated. The relationship between initial compression time and compressive strength, pore structure and pore fractal dimension was studied. The results show that the initial compression time has a significant impact on the porosity and compressive strength of the mortar. The early or late compression time is not conducive to the development of the mortar compressive strength. The initial compression time should be after 2.5 h curing. The pore structure of mortar under pressure molding has obvious fractal characteristics, with fractal dimension ranging from 3.0 to 3.2. There is a good correlation between pore fractal dimension and porosity, which can reflect the advantages and disadvantages of the macro performance of cement-based material to a certain extent.

扫二维码用手机看

[1] 李响.水泥基材料水化性能与浆体微观结构稳定性[D].北京:清华大学,2010.
[2] 沈荣熹.中国纤维增强水泥复合材料的新进展[J].硅酸盐通报,2005,12(5):55-59.
[3] 孙克平,刘永道,刘志茂,等.成型压力对200 MPa级活性粉末混凝土抗压强度和微观结构的影响[J].混凝土,2014(1):28-30,34.
[4] 尹红宇.混凝土孔结构的分形特征研究[D].南宁:广西大学,2006.
[5] 吴中伟.混凝土科学技术的反思[J].混凝土与水泥制品,1988(6):4-5.
[6] 郭剑飞.混凝土孔结构与强度关系理论研究[D].杭州:浙江大学,2004.
[7] JI X,CHAN S Y N,FENG N.Fractal Model for Simulating the Space-filling Process of Cement Hydrates and Fractal Dimension of Pore Structure of Cement-based Materials[J].Cement and Concrete Research,1997,27(11):1691-1699.
[8] 唐明.混凝土孔隙分形特征的研究[J].混凝土,2000(8):3-5.
[9] 杨文萃,葛勇,袁杰,等.掺加无机盐水泥石的孔隙分形特征[C]//交通运输部公路科学研究院交通公路工程研究中心.耐久性水泥混凝土路面学术交流会论文集.海口:交通运输部公路科学研究院交通公路工程研究中心,2009:295-304.
[10] WANG Y,DIAMOND S.A Fractal Study of the Fracture Surfaces of Cement Pastes and Mortars Using a Stereoscopic SEM Method[J].Cement and Concrete Research,2001,31(6):1385-1392.
[11] 金珊珊,杨金龙,索智,等.基于分形理论的水泥砂浆强度预测模型[J].混凝土与水泥制品,2020(6):1-5,12.
[12] JIN S S,ZHANG J X,HAN X.Fractal Analysis of Relation Between Strength and Pore Structure of Hardened Mortar[J].Construction and Build Materials,2017,135:1-7.
[13] 李永鑫,陈益民,贺行洋,等.粉煤灰-水泥浆体的孔体积分形维数及其孔结构和强度的关系[J].硅酸盐学报,2003,31(8):774-779.
[14] 韦江雄,余其俊,曾小星,等.混凝土中孔结构的分形维数研究[J].华南理工大学学报(自然科学版),2007,35(2):121-124.
[15] 谢超,王起才,李盛,等.不同水灰比、养护条件下混凝土孔结构、抗压强度与分形维数之间的关系[J].硅酸盐通报,2015,34(12):3695-3702.
[16] 喻乐华,欧辉,段庆普.掺珍珠岩水泥石孔分形维数及其与孔结构、强度的关系[J].材料科学与工程学报,2007,25(2):201-205.
[17] MA H.Mercury Intrusion Porosimetry in Concrete Technology: Tips in Measurement, Pore Structure Parameter Acquisition and Application[J].Journal of Porous Materials,2014(21):207-215.
[18] 王小虎,彭宇,吉克尼都,等.压汞后水泥基材料的孔隙结构变化[J].硅酸盐学报,2019,47(11):1521-1526.
[19] SURYAVANSHI A K,SCANTLEBURY J D,LYON S B.Pore Size Distribution of OPC and SRPO Mortars in Presence of Chlorides[J].Cement and Concrete Research,1995,25(5):980-988.
[20] 陈文超,蓝垂林,林欢,等.浆体比对混凝土性能的影响[J].混凝土与水泥制品,2013(6):21-24.
[21] 周焕海,唐明述,吴学权,等.碱-矿渣水泥浆体的孔结构和强度[J].硅酸盐通报,1994,13(3):15-19.
[22] 高帅,吴岳峻,唐海涛,等.碱矿渣-粉煤灰砂浆的耐高温性能及孔结构研究[J].混凝土与水泥制品,2021(1):90-94.

上一个

四元掺合料复合碳纤维网的TRC耐久性能研究

下一个

碱式硫酸镁水泥的生命周期评价

头部文案

压力成型对砂浆孔结构、强度及分形维数的影响

相关文件