芯模振动成型高强度等级混凝土排水管的试验研究

头部文案

发布时间：2020-01-06 00:00:00

全国建材科技期刊
全国中文核心期刊
中国科技论文统计源期刊
万方数据-数字化期刊群入网期刊
中国学术期刊（光盘版）全文收录期刊

华东地区优秀科技期刊
江苏省期刊方阵“双效期刊”
中国期刊网全文收录期刊
中国科技期刊数据库全文收录期刊



芯模振动成型高强度等级混凝土排水管的试验研究

Experimental Study on Sewer Pipes with High-Strength Grade Concrete Formed by Core Mold Vibration Technology

2023年第5期

高强混凝土；排水管；芯模振动；强度；养护

High-strength concrete; Sewer pipe; Core mold vibration; Strength; Curing

2023年第5期

10.19761/j.1000-4637.2023.05.042.03

谈维汉，侯雷

惠州高力新材料有限公司，广东惠州 516000

谈维汉，侯雷

谈维汉,侯雷.芯模振动成型高强混凝土排水管试验研究[J].混凝土与水泥制品,2023(5):42-44.

TAN W H,HOU L.Experimental Study on High-strength Concrete Sewer Pipes Formed by Core Mold Vibration Technology[J].China Concrete and Cement Product,2023(5):42-44.

浏览量:

1000

摘要：为探索芯模振动成型高强混凝土排水管的可行性，结合实际生产经验，确定了C70混凝土配合比和芯模振动成型参数，试制了6根公称内径为1 500 mm的钢筋混凝土排水管，在覆盖淋水和自然养护条件下，分别测试了同条件养护立方体试块和管体芯样强度。结果表明：芯模振动工艺在满足质量控制要求情况下，可以成型高强混凝土的排水管；覆盖淋水养护较自然养护更有利于管体混凝土强度的增长。 Abstract: In order to explore the feasibility of forming high-strength concrete sewer pipes by core mold vibration technology, combined with actual production experience, the C70 concrete mix proportion and core mold vibration molding parameters were determined, and six reinforced concrete sewer pipes with a nominal inner diameter of 1 500 mm were trial-produced. Under the conditions of wet covering and natural curing, the strength of the same curing blocks and the core drilling blocks were tested respectively. The results show that the high-strength reinforced concrete sewer pipes can be formed by the core mold vibration technology under the condition of meeting the quality control requirements. Wet covering curing is more conducive to the strength growth of pipe concrete than natural curing.

英文名 : Experimental Study on Sewer Pipes with High-Strength Grade Concrete Formed by Core Mold Vibration Technology

刊期 : 2023年第5期

关键词 : 高强混凝土；排水管；芯模振动；强度；养护

Key words : High-strength concrete; Sewer pipe; Core mold vibration; Strength; Curing

刊期 : 2023年第5期

DOI : 10.19761/j.1000-4637.2023.05.042.03

文章编号 :

基金项目 :

作者 : 谈维汉，侯雷

单位 : 惠州高力新材料有限公司，广东惠州 516000

谈维汉，侯雷

谈维汉,侯雷.芯模振动成型高强混凝土排水管试验研究[J].混凝土与水泥制品,2023(5):42-44.

TAN W H,HOU L.Experimental Study on High-strength Concrete Sewer Pipes Formed by Core Mold Vibration Technology[J].China Concrete and Cement Product,2023(5):42-44.





摘要

参数

结论

参考文献

引用本文

Abstract: In order to explore the feasibility of forming high-strength concrete sewer pipes by core mold vibration technology, combined with actual production experience, the C70 concrete mix proportion and core mold vibration molding parameters were determined, and six reinforced concrete sewer pipes with a nominal inner diameter of 1 500 mm were trial-produced. Under the conditions of wet covering and natural curing, the strength of the same curing blocks and the core drilling blocks were tested respectively. The results show that the high-strength reinforced concrete sewer pipes can be formed by the core mold vibration technology under the condition of meeting the quality control requirements. Wet covering curing is more conducive to the strength growth of pipe concrete than natural curing.

扫二维码用手机看

上一个

荷载与海水环境耦合作用下钢筋混凝土梁的抗弯性能研究

下一个

CFRP加固钢筋混凝土柱复合受扭性能试验研究及损伤分析

头部文案

芯模振动成型高强度等级混凝土排水管的试验研究

相关文件