郭耀雄1,史星祥2,*,徐志军1,张 蕊2,陈渊星1,许志杨2,刘远祥2,夏如茜2,王海新2
郭耀雄,史星祥,徐志军,等.基于图像处理技术的机制砂形貌及机制砂混凝土性能研究[J].混凝土与水泥制品,2023(9):1-6,11.
GUO Y X,SHI X X,XU Z J,et al.Research on the morphology of manufactured sand and the performance of manufactured sand concrete based on image processing technology[J].China Concrete and Cement Products,2023(9):1-6,11.
基于图像处理技术的机制砂形貌及机制砂混凝土性能研究
郭耀雄1,史星祥2,*,徐志军1,张 蕊2,陈渊星1,许志杨2,刘远祥2,夏如茜2,王海新2
郭耀雄,史星祥,徐志军,等.基于图像处理技术的机制砂形貌及机制砂混凝土性能研究[J].混凝土与水泥制品,2023(9):1-6,11.
GUO Y X,SHI X X,XU Z J,et al.Research on the morphology of manufactured sand and the performance of manufactured sand concrete based on image processing technology[J].China Concrete and Cement Products,2023(9):1-6,11.
摘 要:通过图像处理技术研究了影响机制砂颗粒形貌的主要因素及其与机制砂性能的相关性,分析了机制砂颗粒形貌对混凝土性能的影响。结果表明:用经过修正后的球形度指标评价机制砂颗粒形貌比圆形度更合理;使用立轴冲击破制备的机制砂颗粒形貌最好;母岩强度与颗粒形貌呈负相关关系;机制砂的球形度增加,其抵抗压碎的能力较高,且具有较低的空隙率;当球形度由53%提高至72%时,对中低强度等级机制砂混凝土的工作性改善效果显著,而对高强度等级机制砂混凝土的抗压强度改善效果显著。
Abstract: The main factors affecting the particle morphology of manufactured sand and their correlation with the performance of manufactured sand were studied through image processing technology, and the impact of manufactured sand morphology on concrete performance was analyzed. The results indicate that the modified sphericity index is more reasonable for evaluating the particle morphology of manufactured sand compared to circularity. The manufactured sand prepared by using vertical axis impact fracture has the best particle morphology. The strength of the parent rock is negatively correlated with the particle morphology. The sphericity of manufactured sand increases, resulting in higher resistance to crushing and lower porosity. When the sphericity increases from 53% to 72%, the workability of medium and low strength grade manufactured sand concrete is significantly improved, while the compressive strength of high strength grade manufactured sand concrete is significantly improved.
版权所有:中国混凝土与水泥制品网 苏ICP备10086386号 网站建设:中企动力 苏州