苏州混凝土水泥制品研究院有限公司

头部文案

发布时间:2020-01-06 00:00:00
全国建材科技期刊
全国中文核心期刊
中国科技论文统计源期刊
万方数据-数字化期刊群入网期刊
中国学术期刊(光盘版)全文收录期刊
华东地区优秀科技期刊
江苏省期刊方阵“双效期刊”
中国期刊网全文收录期刊
中国科技期刊数据库全文收录期刊
灌浆套筒连接预制混凝土柱抗震性能分析
Seismic performance analysis of precast concrete column connected with grouting sleeve
2024年第9期
预制混凝土柱;灌浆套筒连接;抗震性能;数值模拟
Precast concrete column; Grouting sleeve connection; Seismic performance; Numerical simulation
2024年第9期
10.19761/j.1000-4637.2024.09.075.07
广元建工集团有限公司科技基金项目(GYJG2023001)。
王 衍1,邓夕胜1,李 腾1,张 鹏1,李友江2 ,李 进3
1.西南石油大学 土木工程与测绘学院,四川 成都 610500;2.广元市城市发展集团有限公司, 四川 广元628017;3.乐山电力股份有限公司,四川 乐山 614000

王 衍1,邓夕胜1,李 腾1,张 鹏1,李友江2 ,李 进3

王衍,邓夕胜,李腾,等.灌浆套筒连接预制混凝土柱抗震性能分析[J].混凝土与水泥制品,2024(9):75-81.

WANG Y, DENG X S,LI T,et al.Seismic performance analysis of precast concrete column connected with grouting sleeve[J].China Concrete and Cement Products,2024(9):75-81.

浏览量:
1000
摘   要:为研究灌浆套筒连接预制混凝土柱的抗震性能,利用有限元软件ABAQUS建立了7组灌浆套筒连接预制柱模型,进行了往复荷载下的拟静力分析,讨论了轴压比、长细比和配筋率对灌浆套筒连接预制柱抗震性能的影响。结果表明:各试件延性系数均大于3,有较好的延性;当轴压比由0.3增至0.5时,滞回曲线逐渐由梭形发展为弓形,耗能能力下降,承载力增大7.2%~13.9%,刚度退化加剧;当长细比由4增至6时,试件滞回曲线的捏缩效应加剧,耗能能力下降,承载力下降了23.2%~40.4%,刚度退化加剧;当配筋率由1.24%增至1.79%时,试件的滞回曲线逐渐饱满,耗能能力提高,承载力增加了6.3%~13.8%,刚度退化趋于平缓。 Abstract: In order to study the seismic performance of precast concrete column with grouting sleeve connection, seven groups of precast column models with grouted sleeve connection were established by using the finite element software ABAQUS, and the quasi-static analysis under reciprocating load was carried out. The effects of axial compression ratio, slenderness ratio and reinforcement ratio on the seismic performance of precast column with groutin sleeve connection were discussed. The results show that the ductility coefficient of each specimen is greater than 3, which has good ductility. When the axial compression ratio increases from 0.3 to 0.5, the hysteresis curve gradually develops from spindle to bow, the energy dissipation capacity decreases, the bearing capacity increases by 7.2%~13.9%, and the stiffness degradation increases. When the slenderness ratio increases from 4 to 6, the pinching effect of the hysteresis curve of the specimen increases, the energy dissipation capacity decreases, the bearing capacity decreases by 23.2%~40.4%, and the stiffness degradation increases. When the reinforcement ratio is increased from 1.24% to 1.79%, the hysteresis curve of the specimen is gradually full, the energy dissipation capacity is improved, the bearing capacity is increased by 6.3%~13.8%, and the stiffness degradation tends to be gentle.
英文名 : Seismic performance analysis of precast concrete column connected with grouting sleeve
刊期 : 2024年第9期
关键词 : 预制混凝土柱;灌浆套筒连接;抗震性能;数值模拟
Key words : Precast concrete column; Grouting sleeve connection; Seismic performance; Numerical simulation
刊期 : 2024年第9期
DOI : 10.19761/j.1000-4637.2024.09.075.07
文章编号 :
基金项目 : 广元建工集团有限公司科技基金项目(GYJG2023001)。
作者 : 王 衍1,邓夕胜1,李 腾1,张 鹏1,李友江2 ,李 进3
单位 : 1.西南石油大学 土木工程与测绘学院,四川 成都 610500;2.广元市城市发展集团有限公司, 四川 广元628017;3.乐山电力股份有限公司,四川 乐山 614000

王 衍1,邓夕胜1,李 腾1,张 鹏1,李友江2 ,李 进3

王衍,邓夕胜,李腾,等.灌浆套筒连接预制混凝土柱抗震性能分析[J].混凝土与水泥制品,2024(9):75-81.

WANG Y, DENG X S,LI T,et al.Seismic performance analysis of precast concrete column connected with grouting sleeve[J].China Concrete and Cement Products,2024(9):75-81.

摘要
参数
结论
参考文献
引用本文

摘   要:为研究灌浆套筒连接预制混凝土柱的抗震性能,利用有限元软件ABAQUS建立了7组灌浆套筒连接预制柱模型,进行了往复荷载下的拟静力分析,讨论了轴压比、长细比和配筋率对灌浆套筒连接预制柱抗震性能的影响。结果表明:各试件延性系数均大于3,有较好的延性;当轴压比由0.3增至0.5时,滞回曲线逐渐由梭形发展为弓形,耗能能力下降,承载力增大7.2%~13.9%,刚度退化加剧;当长细比由4增至6时,试件滞回曲线的捏缩效应加剧,耗能能力下降,承载力下降了23.2%~40.4%,刚度退化加剧;当配筋率由1.24%增至1.79%时,试件的滞回曲线逐渐饱满,耗能能力提高,承载力增加了6.3%~13.8%,刚度退化趋于平缓。

Abstract: In order to study the seismic performance of precast concrete column with grouting sleeve connection, seven groups of precast column models with grouted sleeve connection were established by using the finite element software ABAQUS, and the quasi-static analysis under reciprocating load was carried out. The effects of axial compression ratio, slenderness ratio and reinforcement ratio on the seismic performance of precast column with groutin sleeve connection were discussed. The results show that the ductility coefficient of each specimen is greater than 3, which has good ductility. When the axial compression ratio increases from 0.3 to 0.5, the hysteresis curve gradually develops from spindle to bow, the energy dissipation capacity decreases, the bearing capacity increases by 7.2%~13.9%, and the stiffness degradation increases. When the slenderness ratio increases from 4 to 6, the pinching effect of the hysteresis curve of the specimen increases, the energy dissipation capacity decreases, the bearing capacity decreases by 23.2%~40.4%, and the stiffness degradation increases. When the reinforcement ratio is increased from 1.24% to 1.79%, the hysteresis curve of the specimen is gradually full, the energy dissipation capacity is improved, the bearing capacity is increased by 6.3%~13.8%, and the stiffness degradation tends to be gentle.

扫二维码用手机看
未找到相应参数组,请于后台属性模板中添加

(1)建立的灌浆套筒连接预制柱有限元分析结果与试验结果吻合较好,有效模拟了灌浆套筒连接预制柱在地震作用下的力学性能,说明采用本文所建立的有限元模型对灌浆套筒连接预制柱进行抗震性能分析是可行的。
(2)灌浆套筒连接预制柱的轴压比由0.3逐渐提高到0.5时,试件的承载力增大了7.2%~13.9%,试件的延性下降了19%~30%,滞回曲线逐渐由梭形发展为弓形,耗能能力降低,刚度退化加剧,因此,当试件的承载力不足时可适当增加试件轴压比,但过大的轴压比会导致试件稳定性下降。
(3)灌浆套筒连接预制柱的长细比由4逐渐提高到6时,试件的承载力降低了23.2%~40.4%,延性下降了33%~43%,滞回曲线捏缩效应加剧,累计耗能降低了35.0%~55.9%,刚度退化加剧,在设计时应避免过大的长细比。
(4)灌浆套筒连接预制柱的配筋率由1.24%提高到1.79%时,试件的承载力提高了6.3%~13.8%,滞回曲线逐渐饱满,累计耗能提高了6.4%~11.6%,延性增大,刚度退化减缓,试件的抗震性能提高。

[1] 韩超,郑毅敏,赵勇.钢筋套筒灌浆连接技术研究与应用进展[J].施工技术,2013,42(21):113-116.
[2] LIN F,WU X.Mechanical performance and stress strain relationships for grouted splices undertensile and cyclic loadings[J].International Journal of Concrete Structures and Materials,2016,10(4):435-450.
[3] 余斯杰,吕西林,李检保.预制装配式框架柱典型拼装节点精细分析[J].结构工程师,2017,33(4):32-39.
[4] ZHANG W X,DENG X,ZHANG J.Tensile b-ehavior of half grouted sleeve connection at elevated temperatures[J]. Construction and Building Materials,2018,189:568-596.
[5] 吴涛,刘全威,成然,等.钢筋套筒灌浆连接性能试验研究及筒壁应力分析[J].工程力学,2017,34(10):68-75.
[6] ZHAO Y,ZHANG H,PAN Z,et al.Mechanical behavior of grouted sleeve connection for rebars in precast concrete structures and reliability analysis considering the ratio of anchorage length to rebar diameter[J].Case Studies in Construction Materials,2024,20:2883.
[7] 王腾辉,陈权,夏文传,等.基于ABAQUS塑性损伤的半灌浆套筒力学性能有限元分析[J].科学技术与工程,2022,22(9):3709-3715.
[8] XIAO P L,GUANG D Z,QIANG H,et al.Shear behavior of low-aspect-ratio precast bridge columns with grouted sleeve connection considering the effect of axial load ratios[J].Journal of Bridge Engineering,2023,127:232-245.
[9] 赵勇,李锐,王晓锋,等.大直径高强钢筋套筒灌浆连接预制柱抗震性能试验研究[J].土木工程学报,2017,50(5):27-35.
[10] 解琳琳,钟勃健,陈曦,等.套筒灌浆缺陷连接足尺预制混凝土柱抗震性能试验研究[J].工程力学,2023,40(8):68-76.
[11] 聂建国,王宇航.ABAQUS中混凝土本构模型用于模拟结构静力行为的比较研究[J].工程力学,2013,30(4):59-67.
[12] 中华人民共和国住房和城乡建设部,中华人民共和国国家质量监督检验检疫总局.混凝土结构设计标准(2024年版):GB/T 50010—2010[S].北京:中国建筑工业出版社,2015.
[13] 徐庆超,王阳春,熊英倩,等.预制装配式双柱墩抗震性能及影响参数分析[J].工程抗震与加固改造,2023,45(3):118-125.
[14] 刘良林,肖建庄,丁陶.套筒灌浆连接受力失效机理与有限元仿真验证[J].工程力学,2022,39(12):177-189.
[15] 李骥天.装配式结构中半灌浆套筒钢筋连接的本构关系研究[D].重庆:重庆大学,2016.
[16] 任恩朋.灌浆缺陷对装配式钢筋混凝土梁柱节点抗震性能的影响[D].武汉:华中科技大学,2021.
[17] ROEDER C W,CAMERON B,BROWN  C B.Composite action in concrete filled tubes[J].Journal of Structural Engineering,1999,125(5):477-484.

王衍,邓夕胜,李腾,.灌浆套筒连接预制混凝土柱抗震性能分析[J].混凝土与水泥制品,2024(9):75-81.

WANG Y, DENG X S,LI T,et al.Seismic performance analysis of precast concrete column connected with grouting sleeve[J].China Concrete and Cement Products,2024(9):75-81.

相关文件

暂时没有内容信息显示
请先在网站后台添加数据记录。

关注《混凝土与水泥制品》

总访问量 468,401   网站统计

官方微信公众号关闭
苏州混凝土水泥制品研究院有限公司

关于我们    |    联系我们    |    订购杂志    |    回到顶部

版权所有:中国混凝土与水泥制品网  苏ICP备10086386号   网站建设:中企动力 苏州

版权所有:中国混凝土与水泥制品网

苏ICP备10086386号

网站建设:中企动力 苏州