碳纤维表面化学镀镍对水泥基材料压敏特性的影响

头部文案

发布时间：2020-01-06 00:00:00

全国建材科技期刊
全国中文核心期刊
中国科技论文统计源期刊
万方数据-数字化期刊群入网期刊
中国学术期刊（光盘版）全文收录期刊

华东地区优秀科技期刊
江苏省期刊方阵“双效期刊”
中国期刊网全文收录期刊
中国科技期刊数据库全文收录期刊



碳纤维表面化学镀镍对水泥基材料压敏特性的影响

The Influence of Surface Electroless Nickel Plating of Carbon Fiber on Compression Sensibility of Cementitious Materials

２０19年第6期

碳纤维；水泥基材料；压敏性；化学镀镍处理

Carbon fiber; Cement based material; Compression sensibility; Electroless nickel plating

２０19年第6期

10.19761/j.1000-4637.2019.06.049.04

赵洁，党松洋

1.内蒙古建筑职业技术学院，呼和浩特 010010；2.河南省建筑科学研究院，郑州 450000

赵洁，党松洋

赵洁,党松洋.碳纤维表面化学镀镍对水泥基材料压敏特性的影响[J].混凝土与水泥制品,2019(6):49-52.

ZHAO J,DANG S Y.The Influence of Surface Electroless Nickel Plating of Carbon Fiber on Compression Sensibility of Cementitious Materials[J].China Concrete and Cement Products,2019(6):49-52.

浏览量:

1000

摘要：为了制备压敏性良好的碳纤维水泥基复合材料，通过对碳纤维表面进行化学镀镍处理，得到镀液的最佳配方和镀镍工艺，并研究镀镍处理对碳纤维水泥基复合材料压敏性的影响。结果表明，当主盐、还原剂、稳定剂和络合剂浓度分别为30 g/L、20 g/L、50 g/L和10 g/L，镀液pH值为10，试镀时间为15 min时，碳纤维的导电性最佳。镀镍层厚度和碳纤维掺量对压敏性的影响规律一致，当镀镍层厚度和碳纤维掺量分别为1 μm和0.4%时，碳纤维水泥基复合材料的压敏性最佳。 Abstract: In order to prepare carbon fiber reinforced cement-based composites with good compression sensibility, the best formula of nickel plating solution and nickel plating process were obtained by electroless nickel plating on the surface of carbon fiber, and the effect of nickel plating on the pressure sensitivity of carbon fiber cement-based composite was studied. The results show that when the concentration of main salt, reducing agent, stabilizer and complexing agent are 30 g/L, 20 g/L, 50 g/L and 10 g/L, respectively, the pH of the plating solution was 10, and the conductivity of carbon fiber is 15 min, the conductivity of carbon fiber is the best. The effect of nickel plating thickness and carbon fiber content on pressure sensitivity is the same. When the thickness of nickel plating layer and the carbon fiber content are 1 μm and 0.4%, respectively, the carbon fiber cement-based composite material has the best pressure sensitivity.

英文名 : The Influence of Surface Electroless Nickel Plating of Carbon Fiber on Compression Sensibility of Cementitious Materials

刊期 : ２０19年第6期

关键词 : 碳纤维；水泥基材料；压敏性；化学镀镍处理

Key words : Carbon fiber; Cement based material; Compression sensibility; Electroless nickel plating

刊期 : ２０19年第6期

DOI : 10.19761/j.1000-4637.2019.06.049.04

文章编号 :

基金项目 :

作者 : 赵洁，党松洋

单位 : 1.内蒙古建筑职业技术学院，呼和浩特 010010；2.河南省建筑科学研究院，郑州 450000

赵洁，党松洋

赵洁,党松洋.碳纤维表面化学镀镍对水泥基材料压敏特性的影响[J].混凝土与水泥制品,2019(6):49-52.

ZHAO J,DANG S Y.The Influence of Surface Electroless Nickel Plating of Carbon Fiber on Compression Sensibility of Cementitious Materials[J].China Concrete and Cement Products,2019(6):49-52.





摘要

参数

结论

参考文献

引用本文

摘要：为了制备压敏性良好的碳纤维水泥基复合材料，通过对碳纤维表面进行化学镀镍处理，得到镀液的最佳配方和镀镍工艺，并研究镀镍处理对碳纤维水泥基复合材料压敏性的影响。结果表明，当主盐、还原剂、稳定剂和络合剂浓度分别为30 g/L、20 g/L、50 g/L和10 g/L，镀液pH值为10，试镀时间为15 min时，碳纤维的导电性最佳。镀镍层厚度和碳纤维掺量对压敏性的影响规律一致，当镀镍层厚度和碳纤维掺量分别为1 μm和0.4%时，碳纤维水泥基复合材料的压敏性最佳。
Abstract: In order to prepare carbon fiber reinforced cement-based composites with good compression sensibility, the best formula of nickel plating solution and nickel plating process were obtained by electroless nickel plating on the surface of carbon fiber, and the effect of nickel plating on the pressure sensitivity of carbon fiber cement-based composite was studied. The results show that when the concentration of main salt, reducing agent, stabilizer and complexing agent are 30 g/L, 20 g/L, 50 g/L and 10 g/L, respectively, the pH of the plating solution was 10, and the conductivity of carbon fiber is 15 min, the conductivity of carbon fiber is the best. The effect of nickel plating thickness and carbon fiber content on pressure sensitivity is the same. When the thickness of nickel plating layer and the carbon fiber content are 1 μm and 0.4%, respectively, the carbon fiber cement-based composite material has the best pressure sensitivity.

关键词:

碳纤维；水泥基材料；压敏性；化学镀镍处理

扫二维码用手机看

上一个

矿物掺合料对超轻泡沫混凝土气孔结构及性能的影响

下一个

玄武岩纤维筋网对混凝土早期收缩抑制效应研究

头部文案

碳纤维表面化学镀镍对水泥基材料压敏特性的影响

相关文件