苏州混凝土水泥制品研究院有限公司

头部文案

发布时间:2020-01-06 00:00:00
全国建材科技期刊
全国中文核心期刊
中国科技论文统计源期刊
万方数据-数字化期刊群入网期刊
中国学术期刊(光盘版)全文收录期刊
华东地区优秀科技期刊
江苏省期刊方阵“双效期刊”
中国期刊网全文收录期刊
中国科技期刊数据库全文收录期刊

全部文章

房建材料及制品

轻质高强抗裂隔墙板的制备及试验研究
轻质高强抗裂隔墙板的制备及试验研究
  • 王 清1,刘成健2,岳汉威1
2022年第4期
摘要
引用本文
王清,刘成健,岳汉威.轻质高强抗裂隔墙板的制备及试验研究[J].混凝土与水泥制品,2022(4):59-63. WANG Q,LIU C J,YUE H W.Preparation and Experimental Study of Lightweight High-strength Crack Resistance Partition Wall Boards[J].China Concrete and Cement Products,2022(4):59-63.
基于ABAQUS的型钢-RPC梁抗弯性能试验验证
基于ABAQUS的型钢-RPC梁抗弯性能试验验证
  • 段吉强,邓年春,李颢旭
2022年第4期
摘要
引用本文
摘   要:为了研究利用ABAQUS软件模拟活性粉末混凝土(RPC)梁抗弯性能的适用性,基于该软件中的混凝土材料塑性损伤(CDP)模型,针对RPC不同的本构模型,采用当前几种主流的塑性损伤因子计算方法,得到了适用于RPC材料的CDP参数。结合已有的型钢-RPC梁抗弯性能试验,将RPC材料的CDP参数输入ABAQUS软件中,建立了考虑型钢与RPC之间黏结滑移的有限元模型,并将模拟得到的荷载-挠度曲线与试验实测曲线进行了对比。结果表明:在试验实测RPC材料特征值参数值以及合适的RPC本构关系及塑性损伤因子计算方法的基础上,考虑型钢与RPC之间黏结滑移的数值模拟结果与试验结果吻合较好;建议模拟时选择下降段较缓和的受压应力-应变曲线,受拉应力-应变曲线近似强化模型,采用能量损失法及Sidoroff能量等价原理计算RPC材料的CDP参数。 Abstract: In order to study the applicability of using ABAQUS software to simulate the flexural performance of reactive powder concrete(RPC) beams, based on the concrete material plastic damage(CDP) model in ABAQUS software, according to different constitutive models of RPC, several current mainstream plastic damage factor calculation methods were used to obtain the CDP parameters suitable for RPC material. Combined with the existing flexural performance tests of section steel-RPC beams, the CDP parameters of the RPC material were input into the ABAQUS software, and a finite element model considering the bond-slip between the section steel and RPC was established, and the load-deflection curves obtained from the simulation were compared with the measured curves. The results show that on the basis of the eigenvalue parameters of the RPC material measured in the test and the appropriate calculation method of the RPC constitutive relation and the plastic damage factor, the numerical simulation results considering the bond-slip between the section steel and the RPC are in good agreement with the experimental results. It is recommended to select a gentler compressive stress-strain curve in the descending section during simulation, and approximate the strengthening model of the tensile stress-strain curve, and use the energy loss method and the Sidoroff energy equivalent principle to calculate the CDP parameters of RPC.  
段吉强,邓年春,李颢旭.基于ABAQUS的型钢-RPC梁抗弯性能试验验证[J].混凝土与水泥制品,2022(4):64-71. DUAN J Q,DENG N C,LI H X.Experimental Verification of Flexural Performance of Section Steel-RPC Beam Based on ABAQUS[J].China Concrete and Cement Products,2022(4):64-71.
构造钢筋对改性RPC-普通混凝土结合面性能影响试验研究
构造钢筋对改性RPC-普通混凝土结合面性能影响试验研究
  • 王 欣1,杨 哲1,张国强2,陈国斌2,刘黎明3,刘国安1
2022年第4期
摘要
引用本文
王欣,杨哲,张国强,等.构造钢筋对改性RPC-普通混凝土结合面性能影响试验研究[J].混凝土与水泥制品,2022(4):72-77. WANG X,YANG Z,ZHANG G Q,et al.Experimental Study on the Influence of Structural Steel Bars on the Performance of Modified RPC-normal Concrete Interface[J].China Concrete and Cement Products,2022(4):72-77.
上一页
1

关注《混凝土与水泥制品》

总访问量 468,401   网站统计

官方微信公众号关闭
苏州混凝土水泥制品研究院有限公司

关于我们    |    联系我们    |    订购杂志    |    回到顶部

版权所有:中国混凝土与水泥制品网  苏ICP备10086386号   网站建设:中企动力 苏州

版权所有:中国混凝土与水泥制品网

苏ICP备10086386号

网站建设:中企动力 苏州