混沌振动及其对混凝土砌块成型的影响

the Chaotic Vibration and Its Influence on Concrete Block Forming

浏览量:

关键词:

混沌振动;激振器;混凝土;砌块成型

Key words:

Chaotic vibration; Exciter; Concrete; Block forming

刊期:

2017年第9期

DOI:

文章编号:

1000-4637(2017)09-67-03

基金项目:

作者:

刘晓星1,沈建达2

单位:

1.昆明理工大学,650500; 2.云南昆钢钢结构股份有限公司,楚雄 675000)

摘要

摘    要:分析了混凝土砌块振动密实成型效果的影响因素,采用端面式混沌激振器,建立了混沌振动成型机的动力学模型,并进行了动力学分析,得出混沌振动成型机具有较宽的振动频率、较高的振动加速度、振幅和振动烈度,能增加被振混凝土混合物中各种物料与物料之间碰撞和拌合的机会,并降低模具与物料之间的摩擦,提高密实性和均匀性,同时,具有对所加工的砌块原材料适应面宽等优势,最后通过实例分析验证了其有效性。

Abstract:The influence factors of concrete block forming vibration close-grained effect is analyzed.  The chaotic vibrator is applied, the dynamics model of chaotic vibration molding  is established  and motion is analyzed, The results show that the vibration of the chaotic vibration molding machine has a wide frequency, high vibration acceleration and amplitude and vibration intensity, the vibration concrete mixture chance of collision and mixing between all kinds of material can be increased and the friction between mold and material can be reduced and has the better compactness, uniformity, high efficiency and adaptation of wide for block processing by the raw materials. At last, its effectiveness is prored by the example analysis.

结论

(1)混沌振动激振器用于砌块成型中,能随机产生倍频能量较大的宽频振动,从而施加多种振动频率来适应骨料颗粒粒径大小不一的要求。
(2)成型过程中增加了被振混凝土混合物中各种物料与物料之间碰撞和拌合的机会,并能降低模具与物料之间的摩擦,提高了振动砌块成型机的密实成型效果和工作效率。
(3)对成型效果有本质影响的技术参数例如振动加速度、振幅和振动烈度等都有所提高。
(4)将混沌振动技术引入到混凝土砌块成型中是可行而且有效的,采用混沌振动成型的混凝土砌块,其密实度、均匀性等较传统工艺有较大改善。

参考文献

1] 姚平喜,杨世春.砌块成型机振动密实机理初探 [J].砖瓦,2009(2):52-55.
[2] 刘苏文.砌块成型机理和工艺参数设计[J].机械装备,2009(9):54-57.
[3] 柳玲,刘晓星,周雷.端面式混沌激振器的建模及仿真分析[J].中国制造业信息化,2012,41(1):49-54.
[4] 周雷,刘晓星,柳玲.混沌振动磨机力学模型的建立与运动分析[J].新技术新工艺,2013(1):45-47.
[5] 龚纯.MATLAB语言常用算法程序集[M].北京:电子工业出版社,2008.

引用本文

刘晓星,沈建达.混沌振动及其对混凝土砌块成型的影响[J].混凝土与水泥制品,2017(9):67-69.

LIU X X, SHEN J D.The Chaotic Vibration and Its Influence on Concrete Block Forming[J].China Concrete and Cement Products,2017(9):67-69.


上一个: 钢纤维再生混凝土常规三轴压缩试验研究

下一个: 基于HyperMesh和LS-Dyna的径向挤压制管机成型头仿真分析

相关文件