超声波测试矩形钢管混凝土密实度的试验研究

Experimental Research on Compactness of Concrete-filled Rectangular Tubular Tested by Non-metal Ultrasonic

浏览量:

关键词:

首波相位;钢管混凝土;密实度;脱黏

Key words:

First phase; Concrete filled steel tube; Compactness; Debonding

刊期:

2017年第10期

DOI:

文章编号:

1000-4637(2017)10-73-04

基金项目:

作者:

金瑞灵1,南 峰1,伍勇华1,赵国红2

单位:

1.西安建筑科技大学材料与矿资学院,710055;2.汉阴县天元工业废渣科技开发有限公司,725100

摘要

摘   要:自制模拟现场钢管混凝土缺陷模型,采用超声波对测法测试不同脱黏状态钢管混凝土模型的密实度,对比分析了超声波参数变化与钢管混凝土缺陷之间的关系,找出了能够准确判断钢管混凝土缺陷的方法与规律。结果表明,依据超声波首波相位、声时值和波幅的变化,可以判断钢管混凝土脱黏区域、空洞和断层等缺陷。

Abstract: The model which of concrete filled steel tube defect is made, and the different debonding models are tested by non-metal ultrasonic. By analyzing the relationship between the defect and ultrasonic parameters, the method and regularity of judging concrete filled steel tube defect are found. The results show that on the basis of the change of the ultrasonic first phase, duration and amplitude, the concrete filled steel tube defect such as fault and debonding area and empty can be determined.

结论

(1)首波相位、波幅和声速的变化可确定钢管混凝土的脱黏区域。
(2)超声波测试钢管混凝土密实度的最佳龄期为混凝土终凝后至7d左右。
(3)在实际工程中使用超声波测试矩形钢管混凝土密实度,需要根据参数变化综合判断,必要时还需开孔验证。

参考文献

[1] 蔡绍怀.我国钢管混凝土结构技术的最新进展[J].土木工程学报,1999,32(4):16-26. 
[2] 沈剑波,高轩能,沈章春,等.钢管混凝土的特性及其应用研究[J].新型建筑材料,2006(6):73-76. 
[3] 林维正,秦效启,陈之毅,等.方形钢管混凝土超声波检测技术[J].建筑材料学报,2003(2):190-194. 
[4] 童年,童寿兴.超声波首波相位反转的机理解析[J].建筑材料学报,2016(4):678-681.

引用本文

金瑞灵,南峰,伍勇华,等.超声波测试矩形钢管混凝土密实度的试验研究[J].混凝土与水泥制品,2017(10):73-76.

JIN R L, NAN F, WU Y H,et al.Experimental Research on Compactness of Concrete-filled Rectangular Tubular Tested by Non-metal Ultrasonic[J].China Concrete and Cement Products,2017(10):73-76.


上一个: C50级自锚梁混凝土综合蓄热法冬期施工技术

下一个: 陶粒混凝土配制及强度试验研究

相关文件