U形混凝土板桩振动沉桩工艺研究
Process Study on U-shaped Concrete Sheet Vibratory Sinking Pile
关键词:
U形混凝土板桩;振动沉桩;沉桩阻力;围檩架
Key words:
U-shaped concrete sheet piles; Vibration sinking piles; Pile sinking resistance; Purlin frame
刊期:
2016年第3期
DOI:
文章编号:
1000-4637(2016)03-79-05
基金项目:
作者:
朱建舟1,张后禅2
单位:
1.上海中技投资控股股份有限公司,200434;2.上海中技桩业股份有限公司,200434
摘要
摘 要:介绍了U形混凝土板桩振动沉桩工艺原理、特点及振动沉桩阻力计算和振动锤的设备选型计算,并对U形混凝土板桩的沉桩施工工艺及流程进行了阐述,提出了U形混凝土板桩振动沉桩的几种施工顺序组织方法。
Abstract: Technology principle, characteristic of U-shaped concrete sheet vibratory sinking pile, the sinking resistance calculation of vibratory sinking pile and equipment selection calculation of vibratory hammer are introduced, sinking construction process and construction process of U-shaped concrete sheet sinking pile are elaborated. Several kinds of construction organization method of U-shaped concrete sheet vibratory sinking pile are put forward.
结论
U形混凝土板桩是一种新型支护用预制桩,相对于传统的支护桩型具有较高的性价比优势。然而,由于国内传统的预制桩施工大量采用锤击及静压施工,对于排桩式的板桩墙施工应用及研究较少,施工经验也不足。现有的施工队伍基本上是传统预制桩施工队伍,对于板桩墙的施工质量控制较差,传统的锤击及静压施工不能够满足U形混凝土板桩墙施工相互紧密贴合的要求。因此,本文在参照国外U形混凝土板桩成功施工经验的基础上,结合国内施工特点,对U形混凝土板桩振动施工进行了研究和介绍,可为该板桩的进一步市场推广应用及施工提供参考。
参考文献
引用本文
下一个: JG/T 477—2015《混凝土塑性阶段水分蒸发抑制剂》标准解读
相关文件