灌浆加固材料的抗裂技术及应用
Crack Resistance Technology and Application of Grouting Reinforcing Materials
关键词:
灌浆;加固;粉煤灰;抗裂
Key words:
Grouting; Reinforcement; Fly ash; Crack resistance
刊期:
2016年第5期
DOI:
文章编号:
1000-4637(2016)05-16-05
基金项目:
作者:
杨钱荣1,李 娇2,董安心2,童智凯2
单位:
1.同济大学材料科学与工程学院,上海 201804;2.杭州固特建筑加固技术工程有限公司,310012)
摘要
摘 要:研究了粉煤灰、矿粉等掺合料对灌浆加固材料的水化热、体积稳定性的影响和抗裂性能的影响。结果表明,掺加粉煤灰和矿粉后,灌浆材料的水化热和放热速率降低,竖向膨胀出现滞后现象;掺加粉煤灰的灌浆材料早期竖向膨胀率增加、长期干燥收缩率大幅降低。现场试验表明,掺加粉煤灰后,灌浆加固材料的水化放热峰值和最大温差明显降低,早期强度也显著降低,经优化后,灌浆加固材料的抗裂性能得到显著改善。
Abstract: The effects of fly ash, slag powder on hydration heat, volume stability and crack resistance of grouting reinforcing materials were studied. The results show that the hydration heat and its release rate were decreased and vertical expansion was postponed when fly ash and slag powder were added to grouting material. The early vertical expansion rate of the grouting material with fly ash was increased, and the shrinkage rate of the long-term dry shrinkage was greatly reduced. Field tests show that after adding fly ash, grouting reinforcement material hydration exothermic peak and the maximum temperature difference decreased significantly, the early strength also significantly decreased. After optimization, the crack-resistance performance of the grouting reinforce material has been significantly improved.
结论
参考文献
引用本文
下一个: 不同分子量聚天冬氨酸对混凝土性能的影响
相关文件