苏州混凝土水泥制品研究院有限公司

头部文案

发布时间:2020-01-06 00:00:00
全国建材科技期刊
全国中文核心期刊
中国科技论文统计源期刊
万方数据-数字化期刊群入网期刊
中国学术期刊(光盘版)全文收录期刊
华东地区优秀科技期刊
江苏省期刊方阵“双效期刊”
中国期刊网全文收录期刊
中国科技期刊数据库全文收录期刊
PCCP管道内接口渗漏处理工艺技术
Treatment Process Technology for PCCP Internal Interface Leakage
2016年第7期
管道接口渗漏;高压注胶;抗渗剂
Leakage of pipeline interface;High pressure injecting;Anti-permeable admixture
2016年第7期
1000-4637(2016)07-34-04
刘 晓,徐 松,李开岩
山东电力管道工程公司,泰安271222

刘 晓,徐 松,李开岩

浏览量:
1000
摘 要:针对PCCP管道内接口渗漏常规处理工艺存在的不足,提出了PU注浆止漏+快速填充抗渗剂的工艺方法。就PCCP管道单接口打压时出现的内漏、外漏、内外漏(无渗水)、内外漏(有渗水)四种情况,分别采用不同工艺方法进行处理。所提出的接口预埋针头注胶工艺成功解决了渗漏处理后无法验证的问题,打压孔高压注胶工艺成功解决了外水内渗管道无法使用聚硫密封胶封堵的问题,以上工艺方法在实际施工过程中使用效果明显。 Abstract: For the disadvantages of PCCP interface leakage conventional treatment process, the fast filling process of the PU grouting seepage + anti-permeable admixture is put forward. Different treatment technology is taken on the internal leakage, external leakage, internal or external leakage (no water seepage and taking water seepage) of PCCP when single interface is pressured and it has great effect. The proposed interface embedded needles injecting process successfully solves the verification question after leakage, and pressing hole high pressure injecting process successfully solves the penetration of the polysulfide sealant plugging problem of external water intravasation pipe. The actual construction verifies these processes have obvious effect.
英文名 : Treatment Process Technology for PCCP Internal Interface Leakage
刊期 : 2016年第7期
关键词 : 管道接口渗漏;高压注胶;抗渗剂
Key words : Leakage of pipeline interface;High pressure injecting;Anti-permeable admixture
刊期 : 2016年第7期
DOI :
文章编号 : 1000-4637(2016)07-34-04
基金项目 :
作者 : 刘 晓,徐 松,李开岩
单位 : 山东电力管道工程公司,泰安271222

刘 晓,徐 松,李开岩

摘要
参数
结论
参考文献
引用本文

摘   要:针对PCCP管道内接口渗漏常规处理工艺存在的不足,提出了PU注浆止漏+快速填充抗渗剂的工艺方法。就PCCP管道单接口打压时出现的内漏、外漏、内外漏(无渗水)、内外漏(有渗水)四种情况,分别采用不同工艺方法进行处理。所提出的接口预埋针头注胶工艺成功解决了渗漏处理后无法验证的问题,打压孔高压注胶工艺成功解决了外水内渗管道无法使用聚硫密封胶封堵的问题,以上工艺方法在实际施工过程中使用效果明显。

Abstract: For the disadvantages of PCCP interface leakage conventional treatment process, the fast filling process of the PU grouting seepage + anti-permeable admixture is put forward. Different treatment technology is taken on the internal leakage, external leakage, internal or external leakage (no water seepage and taking water seepage) of PCCP when single interface is pressured and it has great effect. The proposed interface embedded needles injecting process successfully solves the verification question after leakage, and pressing hole high pressure injecting process successfully solves the penetration of the polysulfide sealant plugging problem of external water intravasation pipe. The actual construction verifies these processes have obvious effect.

关键词:
管道接口渗漏;高压注胶;抗渗剂
扫二维码用手机看
未找到相应参数组,请于后台属性模板中添加
在多次现场工艺试验的基础上,本文提出了PCCP管道内接口渗漏处理工艺,并在实际施工过程中进行了验证,效果比较理想,希望对PCCP管道安装施工有所帮助。
  

相关文件

暂时没有内容信息显示
请先在网站后台添加数据记录。

关注《混凝土与水泥制品》

总访问量 468,401   网站统计

官方微信公众号关闭
苏州混凝土水泥制品研究院有限公司

关于我们    |    联系我们    |    订购杂志    |    回到顶部

版权所有:中国混凝土与水泥制品网  苏ICP备10086386号   网站建设:中企动力 苏州

版权所有:中国混凝土与水泥制品网

苏ICP备10086386号

网站建设:中企动力 苏州