双掺技术在预制管片冬期生产中的质量控制及应用

Quality Control and Application of Double-dope Technology for Precast Segment in Winter Production

浏览量:

关键词:

双掺技术;高性能混凝土;脱模;外观;气泡;强度;耐久性

Key words:

Double-dope technology; High performance concrete; Demoulding; Exterior appearance; Air bubble; Intensity; Durability

刊期:

2016年第8期

DOI:

文章编号:

1000-4637(2016)08-33-04

基金项目:

作者:

肖钊哲1,田炫宏1,王彦龙2,师小煜2,唐东星2

单位:

1.兰州宏建建材集团有限公司,730050; 2.兰州宏建砼业科技有限公司,730050

摘要

摘   要:以引水工程TBM施工使用C60W8F100高性能混凝土管片生产为背景,针对严寒地区冬季生产的管片混凝土强度等级高、耐久性要求高、制作难度大、外观质量要求严、环境温度对质量影响大、工期紧等诸多因素,通过双掺粉煤灰和矿粉矿物掺合料技术,并采取优化混凝土配合比、调整工艺参数等措施,研制出了符合设计要求的高性能混凝土管片。

Abstract: Based on the diversion work by TBM(Tunnel Boring Machine) construction technique using C60W8F100 high performance concrete to produce segment and according to the some factors of segment production in winter of serve cold area such as high-strength degree concrete, excellent erosion-resisting, high exterior appearance quality requirement, environmental temperature and tight schedules etc, the high performance concrete segment that complies with the design requirements is designed and produced by double mixing fly ash and mineral powder technology, optimizing the mix proportioning of concrete and adjusting the process parameters.

结论

(1)商品混凝土生产企业通过技术改造,将过剩的产能向地下管廊、装配式建筑等预制构件等方向转移符合国家产业政策,也是企业转型升级的必经之路。 
(2)采用矿粉、粉煤灰双掺技术,配合专用聚羧酸减水剂能实现管片高性能化生产,可提高混凝土管片的耐久性,延长水利工程寿命。
(3)严寒地区冬季生产管片制约产品质量的因素较多,因此,需做到科学合理、操作规范。
(4)对于无法量化的造成外观缺陷的原因,要善于总结经验。
(5)气泡无法完全杜绝,但能减少、稳定,做到有限可控。

参考文献

 

引用本文


上一个: 柱截面尺寸对错层结构抗震性能的影响

下一个: RPC电缆沟盖板承载能力试验方法研究

相关文件