赵自强,高 墅
盾构管片吊装孔破坏机制分析及防范措施
Damage Mechanism Analysis of Shield Segment Lifting Hole and Preventive Measures
2016年第9期
盾构法;管片;塑料预埋件;吊装孔;破坏机理
Shield method; Segment; Plastic embedded part; Hoisting hole; Damage mechanism
2016年第9期
1000-4637(2016)09-36-05
赵自强,高 墅
中广核工程有限公司红沿河项目部,瓦房店 116300
浏览量:
1000
盾构管片吊装孔破坏机制分析及防范措施
英文名 :
Damage Mechanism Analysis of Shield Segment Lifting Hole and Preventive Measures
刊期 :
2016年第9期
关键词 :
盾构法;管片;塑料预埋件;吊装孔;破坏机理
Key words :
Shield method; Segment; Plastic embedded part; Hoisting hole; Damage mechanism
刊期 :
2016年第9期
DOI :
文章编号 :
1000-4637(2016)09-36-05
基金项目 :
作者 :
赵自强,高 墅
单位 :
中广核工程有限公司红沿河项目部,瓦房店 116300
赵自强,高 墅
摘要
参数
结论
参考文献
引用本文
摘 要:介绍了盾构隧道管片预埋塑料吊装孔破坏机制及预防措施。通过ABAQUS有限元分析软件模拟计算管片拼装工况下的受力情况,并结合现场实际情况,从预埋件本身、配筋、拼装机、拼装操作手等方面进行了原因分析,并提出了相应的防范措施。
Abstract: The damage mechanism of shield tunnel segment embedded plastic hoisting hole and preventive measures are introduced. Using the ABAQUS finite element analysis software, the force situation of segment is simulated and calculated under the assembling conditions, and combined with the actual situation, the damage causes of hoisting holes are analyzed from the aspects of embedded parts, reinforcement, assembling facilities, assembled gunner. In addition, the corresponding preventive measures are put forward.
关键词:
盾构法;管片;塑料预埋件;吊装孔;破坏机理
扫二维码用手机看
上一个
全装配混凝土斜榫头梁的受力分析
下一个
PHC管桩的免蒸养免蒸压工艺研究
版权所有:中国混凝土与水泥制品网 苏ICP备10086386号 网站建设:中企动力 苏州